第14 卷第1 期

沉淀相形貌和擇優界面上的奇異結構…………………………………………………………張文征(1)

承鋼70 t 轉爐鐵水提釩的動力學行為………黃偉軍，陳 敏，溫 翰，徐 磊，黃宣輝，范富華(3)

AH32 鋼板坯連鑄凝固傳熱過程數值模擬…………………………………………………………………

…………………………………………趙建偉，張樹才，李可斌，張江濤，劉福斌，李花兵(10)

320 t 魚雷罐鐵水溫降的有限元計算………………馬學東，蔣全強，馬 碩，劉 瑩，張艷兵(14)

低鎂釩鈦磁鐵礦的還原機理………………閆占輝，張建良，邢相棟，王振陽，劉興樂，任 山(18)

鐵礦石等溫氣固還原動力學研究…………邵久剛，張建良，劉征建，國宏偉，楊廣慶，王廣偉(24)

貴金屬脫氰過程的攪拌釜流場數值模擬………………………………………………………………………………………………………………劉庭耀，章鵬程，李劍鋒，袁 瑋，韓麗輝，劉 青(29)

電工硅鋼不同連鑄坯的非金屬夾雜物數量研究……李 鎮，張 波，孫 群，劉承軍，姜茂發(36)

電鍍鋅預磷化板晶粒度和粗糙度的工藝控制…………………張雨泉，顧訓雷，楊 芃，劉常升(40)

TC4 鈦合金陽極氧化及其PTFE 復合涂膜耐摩擦磨損性能研究……………………………………………………………………………………杜承天，梁 琛，趙麗婷，李 琳，金 建，楊中東(44)

利用硫化物改善鋼性能的應用研究進展……………呂澤安，倪紅衛，張 華，方 慶，董文亮(51)

由粉煤灰提鈣鐵后的尾渣制備13X 型沸石分子篩的研究……………………………………………………………………………………………王明華，孔垂宇，楊阿敏，王 渺，吳連鳳，翟玉春(58)

鋁酸鈉溶液晶種分解制備超細氫氧化鋁…………………………………姜 妲，張 帥，曲麗英(62)

納米結構9Cr－ODS 鋼的制備工藝……………………………呂 錚，胡彭浩，張國玉，田 利(67)

振動膜形狀測試系統的開發……………………………………………………巖佐貴夫，須崎海里(72)

非平衡CO2－Ar 等離子流的光學氣流評價………………………西田弘氣，山田剛治，川添博光(76)

Vol.14 No.1

Precipitate Morphology and Singular Structure in Preferred Interfaces……………………………………Zhang Wenzheng (1)

Kinetic behaviors of vanadium－extraction process for 70 t converter in Chengde Jianlong special steel company…………………………………………………………Huang Weijun，Chen Min，Wen Han，Xu Lei，Huang Xuanhui，F(xiàn)an Fuhua (3)

Numerical simulation of heat transfer on solidification in continuous casting of AH32 plate slab…………………………………………………………………Zhao Jianwei，Zhang Shucai，Li Kebin，Zhang Jiangtao，Liu Fubin，Li Huabing (10)

Finite element computation on colten iron temperature drop of 320 t torpedo ladle………………………………………………………………………………………………Ma Xuedong，Jiang Quanqiang，Ma Shuo，Liu Ying，Zhang Yanbing (14)

Reduction mechanism of low－magnesium vanadium ilmenite………………………………………………………………………………………………Yan Zhanhui，Zhang Jianliang，Xing Xiangdong，Wang Zhenyang，Liu Xingle，Ren Shan (18)

Kinetics of isothermal reduction of iron ore by gas………………………………………………………………………………………………Shao Jiugang，Zhang Jianliang，Liu Zhengjian，Guo Hongwei，Yang Guangqing，Wang Guangwei (24)

A numerical simulation of flow field in stirring tank during the process of decyanation for precious metal……………………………………………………………Liu Tingyao，Zhang Pengcheng，Li Jianfeng，Yuan Wei，Han Lihui，Liu Qing (29)

Non－metallic inclusions in different slabs of electrical Si－steel…………………………………………………………………………………………………………………………Li Zhen，Zhang Bo，Sun Qun，Liu Chengjun，Jiang Maofa (36)

Controlling process of grain size and surface roughness of prephosphated galvanized steel……………………………………………………………………………………………………Zhang Yuquan，Gu Xunlei，Yang Peng，Liu Changsheng (40)

Anodization of TC4 alloy and friction and wear property with PTFE composite coating……………………………………………………………………………Du Chengtian，Liang Chen ，Zhao Liting ，Li Lin ，Jin Jian ，Yang Zhongdong (44)

Progress of improvement of steel properties by sulfides……………………………………………………………………………………………………………………………Lu Zean，Ni Hongwei，Zhang Hua，F(xiàn)ang Qing，Dong Wenliang (51)

Preparation of 13X type zeolite molecular sieve with fly ash residue removed calcium and iron…………………………………………………………………Wang Minghua，Kong Chuiyu，Yang Amin，Wang Miao，Wu Lianfeng，Zhai Yuchun (58)

Preparation of superfine aluminum hydroxide by seed precipitation in sodium aluminate solution……………………………………………………………………………………………………………………Jiang Da，Zhang Shuai，Qu Liying (62)

Processing technology of nano－structured ODS steels…………………Lv Zheng，Hu Penghao，Zhang Guoyu，Tian Li (67)

Development of shape measurement system for vibrating membranes……………………Takashi ⅠWASA，Kairi SUSAKⅠ(72)

Spectroscopic flow evaluation of nonequilibrium CO2－Ar plasma flow in an arc－jet facility…………………………………………………………………………………………………Genki NⅠSHⅠDA，Gouji YAMADA，Hiromitsu KAWAZOE (76)

第14 卷第2 期

金屬凝固過程與細晶技術…………………………………………………翟啟杰，龔永勇，李仁興(81)

鐵棉聯產的優質礦渣棉生產工藝………………………………王 東，周揚民，羅思義，儀垂杰(83)

鎂鋁尖晶石對鋼液脫碳的影響……………………………………………周 翔，楊 鑫，張晉浩(87)

含鎂合金的制備及在煉鋼中的應用………………………………………王 承，龔 偉，姜周華(91)

關于1 873 K 下鐵液中鋁脫氧平衡熱力學的討論……………劉 達，雷 洪，王天龍，張紅偉(96)

工藝參數對電渣重熔空心鋼錠凝固過程影響的數值模擬………………………………………………………………………………………………………陳 旭，劉福斌，李 星，景 馨，姜周華(100)

高鐵鋁土礦含碳球團的直接還原熔分工藝…………張穎異，倪文杰，齊淵洪，鄒宗樹，程相利(107)

SiO2－CaO－Al2O3－MgO－FeO 熔渣的電解還原行為………高運明，阮 棟，楊映斌，段 超(114)

轉底爐用蓄熱式燒嘴的模擬…………………………趙 凱，宮曉然，胡長慶，師學峰，齊淵洪(121)

酸浸－搖床重選預處理對鈷礦石生物浸出的影響………………………………………………………………………………………………………………劉 偉，楊洪英，佟琳琳，陳國寶，金哲男(126)

Mo 表面Mo(Si，Al)2層的制備及抗高溫氧化性能…………李 雪，盧公昊，王 淼，高田潤(131)

鎳含量對高強耐候鋼組織與性能的影響……………………王俊山，史培陽，劉承軍，姜茂發(135)

攪拌摩擦加工參數對5083 鋁合金組織性能的影響……………………高 兵，陳 雨，丁 樺(139)

熱處理對GH1016 合金組織和性能的影響…………王志剛，祖國胤，程 俊，王志剛，曹 政(144)

關于新型UAV 控制方法的研究……西垣建志，川上耕平，西田信一郎，西村正治，櫻間一德(149)

用電子束輻照法在模具表面制備陶瓷/金屬?gòu)?fù)合層…………………………………………………………………………………………………赤尾尚洋，櫻井雄基，音田哲彥，上原和武，陳中春(152)

Vol.14 No.2

Solidification process and grain refinement technology…………………………Zhai Qijie，Gong Yongyong，Li Renxing (81)

Production technology of high quality slag wool based on the joint production process of iron and slag wool………………………………………………………………………………………Wang Dong，Zhou Yangmin，Luo Siyi，Yi Chuijie (83)

Influence of magnesia－alumina spinel on decarbonization of molten steel………Zhou Xiang，Yang Xin，Zhang Jinhao (87)

Preparation and application of magnesium alloy in steelmaking process………Wang Cheng，Gong Wei，Jiang Zhouhua (91)

Thermodynamics of deoxidation equilibrium with Al in liquid iron at 1 873 K……………………………………………………………………………………………………………………Liu Da，Lei Hong，Wang Tianlong，Zhang Hongwei (96)

A numerical simulation for effect of technological parameters on hollow ingot solidification in electroslag remelting process…………………………………………………………………Chen Xu，Liu Fubin，Li Xing，Jing Xin，Jiang Zhouhua (100)

Direct reduction and melting process of carbon composite bauxite pellets………………………………………………………………………………………………………Zhang Yingyi，Ni Wenjie，Qi Yuanhong，Zou Zongshu，Chen Xiangli (107)

Electrolytic reduction behavior of SiO2－CaO－Al2O3－MgO－FeO molten slag……………………………………………………………………………………………………………Gao Yunming，Ruan Dong，Yang Yingbin，Duan Chao (114)

A simulation for nozzle of rotary hearth furnace………………………………………………………………………………………………………………………………Zhao Kai，Gong Xiaoran，Hu Changqing，Shi Xuefeng，Qi Yuanhong (121)

Effect of preconditioning of acid leaching－gravity separation on cobalt ore bioleaching…………………………………………………………………………………………Liu Wei，Yang Hongying，Tong Linlin，Chen Guobao，Jin Zhenan (126)

Preparation and high temperature oxidation resistance of Mo (Si，Al)2layer on the Mo substrate surface…………………………………………………………………………………………Li Xue，Lu Gonghao，Wang Miao，Takada Jun (131)

Effect of Ni content on structure and properties of high strength weathering resistant steel………………………………………………………………………………………………Wang Junshan，Shi Peiyang，Liu Chengjun，Jiang Maofa (135)

Influence of friction stir processing parameters on structure properties of 5083 aluminum alloy…………………………………………………………………………………………………………………………Gao Bing，Chen Yu，Ding Hua (139)

Effect of heat treatment on microstructure and properties of GH1016 alloy………………………………………………………………………………………………………Wang Zhigang，Zu Guoyin，Cheng Jun，Wang Zhigang，Cao Zheng (144)

A study on control method of new type UAV……………………………………………………………………………………………………Kenji Nishigaki，Kohei Kawakami，Shin－Ⅰchiro Nishida，Masaharu Nishimura，Kazunori Sakurama (149)

Formation of ceramic－metal composite layers on die steels by electron beam irradiation………………………………………………………………………Takahiro Akao，Yuki Sakurai，Tetsuhiko Onda，Kazutake Uehara，Zhongchun Chen (152)

第14 卷第3 期

酸性精煉渣系SiO2－Al2O3－CaO－MgO－FeO－MnO 中Al2O3活度計算模型………………………………………………………………………………………鄒 峰，薛正良，熊 銳，余晨帆(159)

鈦酸鈣化合物合成熱力學與溶出動力學行為………………張 迪，于海燕，潘曉林，翟玉春(164)

富氧蓄熱式鋼包烘烤工藝技術可行性研究…………………李麗麗，鄭麗君，馮亮花，劉 為(170)

真空感應爐坩堝材質對Cr12 鋼純凈度的影響………………耿 鑫，孫詩譽，張志超，仝兆鵬(175)

鈣化—碳化法利用中低品位鋁土礦生產氧化鋁的實驗研究…………………………………………………………………………………………朱小峰，張廷安，王艷秀，呂國志，郭芳芳，李 欣(182)

用于低溫分解二惡英的高效負載型VxOy/Ce/TiO2催化劑的制備與性能…………………………………………………………………………………………………………邵 丹，劉奎仁，李 松(187)

FePt 納米珊瑚的濕化學制備及生長過程…………張 楊，裴文利，郭小蓮，劉翠肖，吳 純(193)

碳纖維表面狀態及其對復合材料剪切性能的影響…………黃 炎，梁祿忠，孫金萍，王志強(197)

SiC 對流變軋制Mg－3Sn－1Mn－xSiC 復合材料組織性能的影響……………………………………………………………………………………………管西花，陳 輝，管仁國，趙占勇，賈志暉(201)

不同燒結氣氛下SiAlON/cBN 陶瓷復合材料的性能研究…………………………………………………………………………………………石曉飛，李拓文，何 超，蔡志新，岳新艷，茹紅強(207)

TiN 薄膜沉積條件對組織結構和結合力的影響………………………肖 娜，杜菲菲，邢 韻(211)

含Ce 燒結Nd－Fe－B 磁體的腐蝕行為……………………周麗娟，裴文利，郭小蓮，朱明剛(217)

熱處理及齒輪形狀對汽車發動機飛輪用高頻淬火齒輪彎曲疲勞強度的影響……………………………………………………………………宮近幸逸，衣立夫，仲子卓志，坂本憲一，小野勇一(222)

熱擠壓法制備C/Al 復合材料………………………高野雅司，赤尾尚洋，音田哲彥，陳中春(227)

不同類型塑料螺旋輪嚙合強度研究……野村誠，小出隆夫，上田昭夫，石田裕介，田村篤敬(232)

考慮通訊遺傳性的探測機器人軌道搜索研究………………………………………………………………………………………………………………太田洋平，西田信一郎，山浦雅司，櫻間一德(236)

Vol.14 No.3

Activity calculation model of Al2O3in SiO2－Al2O3－CaO－MgO－FeO－MnO acid refining slag system……………………………………………………………………………………Zou Feng，Xue Zhengliang，Xiong Rui，Yu Chenfan (159)

Synthesis thermodynamics and leaching dynamics of calcium titanates……………………………………………………………………………………………………………………………Zhang Di，Yu Haiyan，Pan Xiaolin，Zhai Yuchun (164)

Feasibility for ladle baking by oxygen－enriched regenerative combustion……………………………………………………………………………………………………………………………Li Lili，Zheng Lijun，F(xiàn)eng Lianghua，Liu Wei (170)

Effect of crucible materials of vacuum induction furnace on cleanliness of steel Cr12………………………………………………………………………………………………………Geng Xin，Sun Shiyu，Zhang Zhichao，Tong Zhaopeng (175)

Experimental study on calcification–carbonation process for alumina production by using mid－low grade bauxite…………………………………………Zhu Xiaofeng，Zhang Tingan，Wang Yanxiu，Lv Guozhi，Guo Fangfang，Li Xin (182)

Preparation and performance of loaded high efficient catalyst VxOy/Ce/TiO2decomposing dioxins at lower temperature……………………………………………………………………………………………Shao Dan，Liu Kuiren，Li Song (187)

Wet chemical synthesis and growth mechanism of coral－like FePt nanoparticles……………………………………………………………………………………………………Zhang Yang，Pei Wenli，Guo Xiaolian，Liu Cuixiao，Wu Chun (193)

Surface status of carbon fibers and shear properties of carbon fibers reinforced matrix composites…………………………………………………………………………………………Huang Yan，Liang Luzhong，Sun Jinping，Wang Zhiqiang (197)

Effect of SiC on microstructure and property of Mg－3Sn－1Mn－xSiC composite prepared by rheo－rolling…………………………………………………………………Guan Xihua，Chen Hui，Guan Renguo，Zhao Zhanyong，Jia Zhihui (201)

Properties of SiAlON/cBN ceramic composites in different sintering atmosphere………………………………………………………………………………………Shi Xiaofei，Li Tuowen，He Chao，Cai Zhixin，Yue Xinyan，Ru Hongqiang (207)

Effect of deposition conditions on structure and adhesion strength of TiN films………Xiao Na，Du Feifei，Xing Yun (211)

Corrosion behavior of low cost sintered Nd－Fe－B magnet containing element Ce…………………………………………………………………………………………………………Zhou Lijuan，Pei Wenli，Guo Xiaolian，Zhu Minggang (217)

Bending fatigue strength of induction hardened gears assembled with vehicle’s engine flywheel…………………………………………………………………………Kouitsu Miyachika，Lifu Yi，Masashi Nakako，Kenichi Skamoto，Yuichi Ono (222)

Fabrication of aluminum－graphite composites by hot extrusion………………………………………………………………………………………………………………Masashi Takano，Takahiro Akao，Tetsuhiko Onda，Zhong－Chun Chen (227)

Strength of plastic helical wheels meshed with various types of worms…………………………………………………………………………………………………Makoto Nomura，Takao Koide，Akio Ueda，Yusuke Ⅰshida，Atsutaka Tamura (232)

A study on path planning method for exploration robot taking account of communication transmissibility………………………………………………………………………Yohei Ota，Shin-Ⅰchiro Nishida，Masashi Miura ，Kazunori Sakurama (236)

第14 卷第4 期

劇烈塑性變形:不僅是晶粒細化……………………………………………………………夏克農(239)

鋁合金等通道擠壓晶粒細化機制……………………………………………………………黃 巖(245)

晶粒尺寸對大塑性變形的兩相合金超塑性的影響………………………………………………………………………………………………張念先，Megumi Kawasaki，黃 毅，Terence G．Langdon (255)

純鋁等徑角擠壓塑性流動的有限元模擬分析…………………………………………………………………………………趙男男，劉群浩，吳 俊，史旭晨，朱思旭，張 旭，班春燕，崔建忠(263)

多向鍛造道次及終鍛溫度對5182 鋁合金組織性能的影響…………………………………………………………………………………………朱慶豐，李展志，閆 瑋，王高松，左玉波，崔建忠(269)

塊體超細/納米結構金屬材料的累積疊軋制備技術………………………………………蔡明暉(275)

典型晶格結構FCC/BCC 鋼的劇烈塑性變形研究現狀……馬 明，蔡明暉，唐正友，丁 樺(283)

攪拌摩擦加工及后續熱處理對7B04－O 鋁合金組織和硬度的影響………………………………………………………………………………陳 雨，楊文靜，李曉華，付明杰，高 兵，丁 樺(293)

相比例對高壓扭轉Ti－6Al－4V 合金晶粒細化及顯微硬度的影響……………………………………………………………………………張文 井，付 杰，黃 毅，丁 樺，Terence G.Langdon (298)

鎂及鎂合金劇烈塑性變形研究及發展趨勢……………………………許斯洋，李繼忠，丁 樺(305)

Vol.14 No.4

Severe plastic deformation:beyond grain refinement………………………………………………………Kenong Xia (239)

Mechanisms of grain refinement in aluminium alloys by ECAE………………………………………………Yan Huang (245)

Influence of grain size on superplastic properties of a two－phase Pb－Sn alloy processed by severe plastic deformation…………………………………………………Nian Xian Zhang，Megumi Kawasaki，Yi Huang，Terence G．Langdon (255)

The finite element simulation of plastic flow in equal channel angular pressing for pure Al………………………………………………Zhao Nannan，Liu Qunhao，Wu Jun，Shi Xuchen，Zhu Sixu，Zhang Xu，Ban Chunyan，Cui Jianzhong (263)

Effect of forging passes and final forging temperature on the structure and property of 5182 aluminum alloy during multi－direction forging process……………………Zhu Qingfeng，Li Zhanzhi，Yan wei，Wang Gaosong，Zuo Yubo，Cui Jianzhong (269)

An accumulative roll bonding technology for bulk ultrafine/nano－structured metallic materials…………Cai Minghui (275)

Research progress on severe plastic deformation of steels with BCC/FCC crystal structures……………………………………………………………………………………………………Ma Ming，Cai Minghui，Tang Zhengyou，Ding Hua (283)

Microstructures and hardness of stir zone for friction stir processed and post－processed heat treatment 7B04－O aluminum alloy………………………………………………Chen Yu，Yang Wenjing，Li Xiaohua，F(xiàn)u Mingjie，Gao Bing，Ding Hua (293)

Influence of phase volume fraction on grain refinement and microhardness of a Ti－6Al－4V alloy by high－pressure torsion………………………………………………Zhang Wenjing，F(xiàn)u Jie，Huang Yi，Ding Hua，Terence.G.Langdon (298)

The current situation and prospect for magnesium and its alloys by severe plastic deformation………………………………………………………………………………………………………………………Xu Siyang，Li Jizhong，Ding Hua (305)