李書進+王見祥+孫磊+孔凡
摘要:對一種基于空腔樓板的新型耗能減震裝置的參數優化問題進行了探討;對基于拉格朗日變分原理推導出的裝有該裝置的受控結構非線性運動方程進行統計線性化處理,以結構的水平位移方差最小化為優化準則,應用定點理論方法對該裝置的參數優化問題展開研究;利用蒙特卡洛模擬方法對不同情況下受控結構的減震效果進行對比分析,驗證了該方法的有效性。結果表明:采用所提方法能有效進行耗能減震裝置的參數優化設計,為該裝置的推廣應用提供依據。
關鍵詞:耗能減震裝置;參數優化;定點理論;蒙特卡洛模擬;空腔樓蓋
中圖分類號:TU352.1 文獻標志碼:A
文章編號:1673-2049(2017)02-0010-08
Abstract:The parameter optimization of a new energy dissipation device based on hollow floor slab was discussed. The nonlinear motion equation of the controlled structure with the device based on the Lagrange variational principle was treated using statistical linearization method. Then, taking the device as object, the structural horizontal displacement variance minimization was taken as the optimization criterion, the parameter optimization problem of the device was studied using the fixed point theory. The Monte Carlo simulation method was used to compare the damping effects of the controlled structure under different conditions, and the effectiveness of the proposed method was verified. The results show that the proposed method can be used to optimize the parameters of energy dissipation device effectively, and provides the basis for the application of the device.
Key words:energy dissipation device; parameter optimization; fixed point theory; Monte Carlo simulation; hollow floor slab
0引 言
近年來,裝配式建筑在中國得到了極大的推廣,為減少現場作業量和構件自重,各種空腔樓蓋體系也在工程中得到廣泛應用[1-2]。利用分布于這種樓蓋體內的大量空腔,本文提出了一種新型滾動式調諧質量阻尼器(TRMD)耗能減震裝置,并對其工作機理和減震性能進行了初步探討[3-4]。該裝置具有制作方便、布置靈活且不影響結構使用功能等優點。
滾動式調諧質量阻尼器是一種基于傳統調諧質量阻尼器(TMD)研究開發出來的減震裝置,屬于被動控制技術,為使該裝置控制效果最優,需要對其參數進行優化設計。