遼寧工業大學學報(自然科學版)第42卷總目次

基于Stem法的考慮決策者偏好的突發事件應急物資調度的研究………………………………………………孫太保，楊 蘇(1)

第三方物流企業KPI體系構建及績效評價模型………………………………………………王麗艷，趙宏偉，趙 穎，欒若星(7)

基于網絡分析的競技游戲作戰模式……………………………………………………………田汝浩，陸青云，白 金，張立震(12)

基于覓食生境選擇的改進粒子群算法………………………………………………………………………陳子廓，史憲睿(19)

降雨對風力機翼型氣動性能的影響………………………………………………………文 洮，陳春霖，王林柱，楊元娟(22)

威布爾分布參數估計方法的比較……………………………………………………………………李明澤，李樹有，宓 穎(31)

一種縱彎復合模態超聲振子的頻率修正方法……………………………………趙彥東，CLARA Nasadit. I. S. M，何 勍(36)

基于對標開發的懸架動力學優化………………………………………………………………………………張 鵬，王洪新(40)

基于PLC控制的離心泵自吸裝置的設計……………………………………………………………盧泉澄，唐 宇，楊其鴻(47)

裂紋內水壓力對重力壩裂紋擴展過程影響的研究………………劉鈞玉，張 琪，王宇旸，孔祥娜，張?zhí)煊?，寧寶?51)

不同摩擦系數下雙凹面摩擦擺支座耗能性能的研究……………………………………陳章偉，董錦坤，李 茜，竇存杰(56)

于正交設計PVA-玄武巖混雜纖維高性能混凝土力學性能研究…………………………陳 晨，張曉東，李 曈，范錦澤(60)

NaY分子篩吸附脫除含Ni2+廢水研究…………………………趙 榮，洪 新，趙 罡，富 添，于慶雪，關慶云，陳佳明(65)

基于正/逆向混合技術的發動機數模重構……………………………………………………李衛民，叢 偉，潘士超，陳肖依(71)

一種滾珠絲杠副超聲振動減摩振子的研究……………………………………………………………陳 曄，張 臣，何 勍(78)

基于LabVIEW的數據庫管理系統開發………………………………………………………徐霄唯，張志華，金 添，李 剛(82)

前排乘員側約束系統的仿真與優化……………………………………………………………何亞楠，李 剛，蔡 闖，王宏吉(88)

Q355鋼的焊接接頭質量控制研究…………………………………張博煒，關博文， 孫 楠， 蘇 海， 高珊珊， 劉 穎(94)

壓鑄工藝中模溫監控應用探究……………………………………………………………………………………………彭 敏(98)

拉格朗日插值法在數據清洗中的應用………………………………………………………趙 莉，孫 娜，李麗萍，崔 杰(102)

基于機器學習PAI的網上購書推薦系統實驗研究………………………………………………………………葉小芹，王峻松(106)

利用硫酸根自由基去除水中雙酚A污染的研究綜述…………………………………………………高艷嬌，陳 玉，張 鑫(111)

合肥大學城基坑開挖對既有建筑物的影響分析………………………………葉茂松, 黃雄飛, 肖建勇, 岳 陽, 李順群(118)

完全剪力連接疊合板組合梁靜力試驗研究………………………………………………………………………………袁西貴(122)

不同雨強條件下濾芯滲井滲透性能規律研究…………………………………………………………………張光明，李順群(127)

黃河流域房地產價格的區域差異研究………………………………………………………張 帥，孫 偉，楊春明，劉妃平(130)

基于數學方法的音樂流派影響因素與演變預測研究…………………………………………………李 夢，張 楓，李 勇(135)

分布式電動汽車橫擺力矩控制研究……………………………………………………………………………盧麗霞，李 剛(141)

基于MATLAB與SOLIDWORKS的不同凸輪曲線凸輪機構運動特性分析…………………………楊志勇，張德強，李 煜(148)

零擔貨物快遞服務公司自動匹配研究………………………………………………………阮永嬌，陳 昕，孫承臻，陳婭鑫(151)

橋式凹板公路運輸裝備結構設計及受力分析………………………………………………………何衛東，康澤宇，于喜年(156)

碳含量對納米貝氏體組織形成的影響………………………………………………陳 鳴，李青春，劉 偉，常國威，陳淑英(160)

化學氣相沉積法在液態銅襯底上制備石墨烯的研究進展………………………………………………………………王宇薇(164)

基于GAT-GRU模型的交通流預測方法…………………………………………………………………………趙 靜，李 昕(170)

基于MATLAB的小波去噪的研究………………………………………………………………………………張 靜，陶彬彬(177)

青島市建筑廢棄物資源化利用研究……………………………………………………………………湯青慧，徐雅琪，張 喆(183)

三維土壓力盒在原位碾壓試驗中的應用研究………………………………………………黃翔宇，李順群，方大轉，包義勇(189)

帶有外部擾動的熱波耦合系統的H∞魯棒性……………………………………………………………………梁 陽，金雪蓮(193)

基于SD的制造業供應鏈突發事故的應急管理模型研究………………………………………………………劉曉偉，劉燚然(197)

城市基礎設施PPP項目的融資風險評價………………………………………………………………………王連月，劉 雪(204)

四電機獨立驅動FSEC賽車行駛狀態估計……………………………………………………………武亞南，李 剛，宋成鏢(211)

基于行人橫穿場景的AEB系統性能測試與評價研究……………………………蘇占領，牛成勇，徐建勛，張國勇，劉冰玉(218)

航空用7050鋁合金熱處理工藝的研究進展………………………………………袁 輝，趙作福，趙宇擎，李紀元，許園標(223)

熱處理對高碳鉻鐵顆粒增強Q235鋼基表面復合材料組織與性能的影響 ……………………………………………………………………………陳 鳴，李青春，薛艷杰，李寶德，李 博，常國威(228)

超級電容器中的CoMoO4電極材料的研究進展………………………………………………邸抑非，相 珺，趙榮達，伍復發(232)

基于注意力機制的視網膜圖像研究……………………………………………………………………李佳浩，李 昕，王 薇(236)

基于增強注意力的耦合協同過濾推薦方法………………………………………………………………………………劉芃蘭(241)

城市垃圾填埋場土工膜在復雜荷載作用下受力特性的研究進展……………………………………………高二崇，孫洪軍(248)

基于理想解法-灰色關聯法的老舊小區改造綜合效益評價…………………………………………胡龍偉，王金榮，夏思雨(253)

考慮服務可靠度的生鮮電商前置倉選址問題研究………………………………………………………………………吳競鴻(259)

遼寧省物流業綠色發展水平測度………………………………………………………………………尚銀斐，初銘暢，張曉芬(264)

基于BP神經網絡的零部件供應商評價研究……………………………………………………………………郭倩茹，唐陽山(270)

綠色住宅用戶滿意度影響因素及提升路徑研究………………………………………………………………莊 麗，石凱旋(274)

基于三方演化博弈的智慧建造信息安全監管策略研究………………………………………………崔慶宏，朱鈺冉，閆盛華(281)

基于RFID技術的電子門票系統設計……………………………………………………………………………………趙 穎(289)

基于深度學習的多模態情感分析研究綜述………………………………………………………李文瀟，梅紅巖，李雨恬(293)

基于LightGBM算法的游戲付費預測………………………………………………………盧厚達，李 昕，褚治廣，張秘源(299)

基于YOLOv5-EA的交通標志識別………………………………………………………………………………孟繁星,于 瓅(303)

基于AutoForm提升車身鈑金件材料利用率的案例……………………劉 寧，周 亮，方振龍，潘遠安，周凌宇，李洪濤(311)

新能源汽車運行故障數據分析與自動追溯模型研究………………………………………阮永嬌，陳 昕，孫承臻，陳婭鑫(316)

減振器活塞阻尼孔的優化設計……………………………………………………………………李衛民，潘士超，陳肖依(320)

氧化石墨烯及其復合材料對重金屬離子的吸附研究進展…………………………………………陳玥琪，張震斌，單鳳君(325)

智能一體化設備處理分散型生活污水……………………………………………………………………………………尹文利(333)

次分數機制下的兩資產幾何亞式彩虹期權定價模型………………………………………………劉 順，王欣怡，郭志東(337)

基于區塊鏈技術的奢侈品供應鏈協調問題研究…………………………………………………………………………薛 梅(344)

基于逆向工程和3D打印的水泵葉輪快速重建方法…………………………………………李衛民，張凱璇，刁家宇，付松松(351)

融合檢測區標定與特征點識別的車速估計方法研究…………………………………………………趙麗麗，張 麗，唐陽山(357)

基于FlexSim的裝載機焊接車間設計……………………………………………………………………………………辛立軍(362)

基于灰色理論激光熔覆對形貌影響與優化…………………………………………………劉 琛，穆星宇，李金華，劉 斌(367)

梯度多孔Fe-30Mn合金的制備與性能研究……………………………………………………………曲美秀，李 強，耿 芳(373)

兆赫頻超聲塑料焊接溫度場的數值模擬……………………………………………………郭 棟，喬冠堯，李 亮，何 勍(378)

T型三電平逆變器的死區補償策略研究………………………………………………………………陳 玲，紀 萍，吳靜妹(382)

基于物流配送的車輛路徑優化問題綜述……………………………………………………………………王雪鳳，陳 昊(386)

社交網絡中一種基于偏好的隱私度量方法研究……………………………路太宇，李曉會，張馨予，呂維新，鄧 倩(393)

金屬有機骨架材料去除水中四環素研究進展………………………………………………………張愛佳，單鳳君，張震斌(399)

制造業集聚對工業綠色全要素生產率的溢出效應研究……………………………………………曹 澤，汪永春，殷天賜 (408)

Research on Emergency Supplies Dispatch Based on STEM Method Considering Decision-Maker’s Preference……………………………………………………………………………………………………………(1)

KPI System Construction and Performance Evaluation Model of Third-party Logistics Enterprises……………………………………………………………………(7)

Competitive Game Combat Mode Based on Network Analysis…………………………………………………………………………(12)

Improved Particle Swarm Optimization Based on Feeding Habitat Selection………………………………………………………………………………………………………(19)

Effect of Rainfall on Aerodynamic Performance of Wind Turbine Airfoil…………………………………………………………………(22)

Comparison of Parameter Estimation Methods ofWeibull Distribution…………………………(31)

Frequency Correction Method for a Longitudinal-bending Hybrid Mode Ultrasonic Vibrator ……………………………………………………………………………(36)

Suspension Dynamics Optimization Based on Benchmarking Development……………………(40)

Design of Self-priming Device of Centrifugal Pump Based on PLC Control ………………………………………………………………………………………(47)

Study on Influence of Water Pressure Inside Crack on Crack Propagation Process ………………………………(51)

Study on Energy Dissipation Properties of Friction Pendulum Bearing with Double Concave Surface under Different Friction Coefficients………………………………(56)

Research on Mechanical Properties of High Performance Concretewith PVA -basalt Hybrid Fiber Based on Orthogonal Design………………………………………………………(60)

Adsorption of Ni2+from Wastewater over NaY Molecular Sieve ……………………………(65)

Digital Analog Reconstruction Of Engine Based on Forward/Reverse Mixing Technology …………………………………………………………………………(71)

Study on Ultrasonic Anti-friction Vibrator of Ball Screw Pair…………………………………(78)

Development of Database Management System Based on LabVIEW………………………………………………………………………………(82)

Simulation and Optimization of Front Passenger Side Restraint System………………………………………………………………………………(88)

Research on Quality Control of Q355 Steel Welded Joint………………………………………………(94)

Application of Die Temperature Monitoring in Die Casting Process……………………………………………………(98)

Application of Lagrangian Interpolation Method to Data Cleaning……………………(102)

Experimental Research on Online Book Recommendation System Based on Machine Learning PAI…………………………………………………………………………………………………(106)

Review of Removing Bisphenol A Pollution from Water by Sulfate Radicals …………………………………………………………………………………………(111)

Analysis of Influence of Foundation Pit Excavation on Existing Buildings in Hefei University …………………………………………………(118)

Static Test Study of Complete Shear Connection Composite Beam with Laminated Slabs ……………………………………………………………………………………………………………………(122)

Study on Permeability Law of Filter Core Seepage Well under Different Rain Intensities………………………………………………………………………………………………(127)

Study on Regional Differences of Real Estate Prices in the Yellow River Basin……………………………………………………………………(130)

Research on the Influencing Factors and Evolution Prediction of Music Genre Based on Mathematical Method……………………………………………………………………………………………………(135)

Research on Yaw Moment Control of Distributed Electric Vehicle……………………………………………(141)

Analysis of Kinematic Characteristics of Cam Mechanisms with Different Cam Curves Based on MATLAB and SOLIDWORKS……………………………………………………(148)

Research on Automatic Matching of LCL Express Service Company………………………………………………………………(151)

Structural Design and Force Analysis of Bridge Gravure Road Transport Equipment………………………………………………………………………………………(156)

Effect of Carbon Content on the Formation of Nano-Bainite Structure……………………………………………………(160)

Research Progress of Chemical Vapor Deposition of Graphene on Liquid Copper Substrate……………………………………………………………………………………………………………………(164)

Traffic Flow Prediction Method Based on the GAT-GRU Mode………………………………………………(170)

Research on Wavelet Denoising Based on MATLAB…………………………………………………(177)

Study on Resource Utilization of Construction Waste in Qingdo …………………………………………………………………………………………(183)

Application Research on Three-dimensional Earth Pressure Cell in In-situ Rolling Test ………………………………………………………………(189)

The H∞Robustness of the Heat-wave Coupled System with External Disturbance…………………(193)

Research on Emergency Management Model of Manufacturing Supply Chain Accidents Based on SD………………………………………………………………………………………………………(197)

Financing Risk Evaluation of Urban Infrastructure PPP Project………………………………………(204)

Research on Driving State Estimation of FSEC Racing Cars Driven Independently by Four Motors………………………………………………………………………………………(211)

Research on Performance Test and Evaluation of AEB System Based on Pedestrian Crossing Scene………………………………………………(218)

Research Progress of Heat Treatment process of 7050 Aluminum Alloy for Aviation…………………………………………………………(223)

Effect of Heat Treatment on Microstructure and Properties of Q235 Steel Matrix Composites Reinforced by High CarbonFerrochromium Particles……………………(228)

Research Progress of CoMoO4Electrode Materials for Supercapacitors………………………………………………………………………………(232)

Study on Retinal Image Based on Attention Mechanism…………………………………………(236)

Enhanced Attention-based Coupled Collaborative Filtering Approach for Recommendation………………………(241)

Research Progress of Mechanical Characteristics of Geomembrane in Municipal Refuse Landfill under Complex Loads…………………………………………………………………………(248)

Comprehensive Benefit Evaluation of Old Residential District Reconstruction Based on Ideal Solution and Grey Correlation Method……………………………………………(253)

Research on Location Selection of Fresh E-commerce Pre-warehouses with Service Reliability ……………………………………………………………………………………………………………………(259)

Measurement of Green Development Level of Logistics Industry in Liaoning Province …………………………………………………………………………(264)

Research on Component Supplier Evaluation Based on BP Neural Network…………………………………………………………………………………………………(270)

Study on Influencing Factors of Residents’ Satisfaction of Green Buildings Based on SEM…………………………………………………………………………………………………………(274)

Research on Smart Construction Information Security Supervision Strategy Based on Tripartite Evolutionary Game…………………………………………………(281)

Design on Tourist Attraction Electronic Ticket System Based on RFID Technology…………………………………(289)

Survey of Multimodal Sentiment Analysis Based on Deep Learning……………………(293)

Game Payment Prediction Based on LightGBM Algorithm……………(299)

Traffic Sign Recognition Based On YOLOv5-EA………………………………………………………(303)

A Case of Improving the Material Utilization Rate of Body Sheet Metal Parts Based on AutoForm ………………………………………(311)

Research on Data Analysis and Automatic Traceability Model of New Energy Vehicle Operation Failure …………………………………………………………………(316)

Optimization Design of Piston Damping Hole in Shock Absorber……………………(320)

Research Progress in Adsorption of Heavy Metal Ions on Graphene Oxide and its Composites ………………………………………………………………………………(325)

Treatment of Decentralized Domestic Sewage with Intelligent Integrated Equipment…………………………………(333)

Pricing Model of Two-asset Geometric Asian Rainbow Options in the Sub-fractional Mechanism ………………………………………………………………………………………(337)

Research on Coordination of Luxury Supply Chain Based on Blockchain Technology…………………………………(344)

Rapid Reconstruction of Pump Impeller Based on Reverse Engineering and 3D Printing ……………………………………………………………………(351)

Study on Vehicle Speed Estimation Method Based on Detection Area Calibration and Characteristic Point Identification………………………………………………………………………………………(357)

Design of Loader Welding Workshop Based on Flexsim………………………………………………………………(362)

Influence and Optimization of Laser Cladding on Morphology Based on Gray Theory ……………………………………………………………………………………(367)

Study on Preparation and Property of Gradient Porous Fe-30Mn Alloys……………………(373)

Numerical Simulation of the Temperature Field of Megasonic Welding for Plastics ………………………………………………………………………………(378)

Research on Dead Time Compensation Strategy of Three-level T-type Inverter ………………………………………………………………………………………………(382)

Review of Vehicle Routing Optimization Based on Logistics Distribution…………………………(386)

Research on Preference-based Privacy Measurement Method in Social Networks ……………………………………………………………(393)

Progress in Removal of Tetracycline from Water by Metal-organic Framework Materials ……………………………………………………………………………(399)

Study on the Spillover Effect of Manufacturing Agglomeration on Industrial Green Total Factor Productivity …………………………………………………………………………………………(408)