2017 年《合成樹脂及塑料》第 34 卷第 1～6 期總目次

研究與開發

一種亞胺羧酸型螯合樹脂的合成 ································································································ 程云雷，曹有名（1-1）

酶解木質素阻燃劑的制備及其對TPO阻燃性能的影響 ················ 王棲桐，馮 鈉，劉 俐，王志超，曲敏杰，張 紅，溫艷慧（1-6）

基于煤矸石構筑環境友好型阻燃EVA的性能研究 ······························································· 錢 翌，李少權，武 洋（1-11）

水性混凝土脫模劑用硅油的改性及其乳化性能 ············································ 孫義明，馬騰飛，李鵬程，姜仡鵬，梁 爽（1-16）

表層含氨基PBA-P（MMA-VAm）核殼乳膠粒子的制備 ························································· 辛丹丹，劉喜軍，婁春華（1-20）

高流動高等規指數寬相對分子質量分布聚丙烯的制備 ·············································· 周奇龍，譚 忠，于金華，李鳳奎（1-25）

PBS-PTMO嵌段共聚物的合成及其結晶動力學 ··································································· 黃 勇，劉俊紅，張愛民（1-31）

雙向拉伸聚乳酸薄膜的制備 ····································································································· 羅焯欣，董月平（1-36）

聚丙烯/滑石粉復合材料的制備及其力學性能 ···································································· 劉朝福，史雙喜，韋雪巖（1-41）

納米SiO2負載鎳催化劑催化環烯烴聚合 ································································································· 鄭興榮（1-44）

建筑涂料用水性聚氨酯乳液的改性研究 ································································································ 邵乘勝（1-48）

凝固浴對聚芳硫醚砜分離膜結構與性能的影響 ························································· 王 越，袁書珊，楊 杰，王孝軍（2-1）

PP-g-（DAP-co-GMA）和PP-g-（DAP-co-MAH）的制備及其增容PP/PET ············· 董銀春，沈 帆，郭秋月，林永男，徐建平（2-7）

熔融酯交換法合成聚碳酸酯預聚體的研究 ····························· 鄧 成，姜慧敏，鄭艷春，邱琪浩，王晨曄，傅建永，林潤雄（2-12）

微膠囊對環氧樹脂力學性能的影響 ······································································ 郭瑞泉，劉景勃，覃蘭媚，張發愛（2-16）

雷達用高性能塑料及其表面導電涂層的性能 ····································· 李 萍，吳信濤，趙 賓，徐 杰，薛克敏，瞿啟云（2-20）

改性hBN填充氰酸酯復合材料的性能 ···································································· 張有茶，賈成廠，賈 鵬，賈永昌（2-24）

幾種Ziegler-Natta催化劑催化丙烯聚合的反應動力學 ····································································· 陳 月，夏先知（2-28）

NaCl濃度對SPFR分散穩定性和封堵性能的影響 ············································ 王 博，林梅欽，李明遠，楊子浩，張 娟（2-34）

光致發光PA 66/EuZ復合纖維膜的制備 ············································· 于 翔，趙 珂，王 娜，朱少昌，王延偉，徐 茜（2-37）

基于硅烷偶聯劑表面改性PF/CCTO介電復合材料的制備 ······················································ 趙 陽，張永明，苗宗成（2-42）

異丙威熒光分子印跡聚合物的制備 ······································································································ 張小偉（2-46）

聚合溫度對乙烯聚合用釩系催化劑FVC-01性能的影響 ············································· 趙增輝，王登飛，付 義，方 宏（2-50）

PS-b-PEO為分散劑的苯乙烯懸浮聚合 ··························································· 張鴻聖，趙忠夫，楊 景，馬文花，張春慶（3-1）

助催化劑對BCE催化劑催化乙烯與1-己烯共聚合的影響 ····································· 郭文琦，楊洪瑞，張 震，傅智盛，范志強（3-6）

石墨烯對全同聚1-丁烯結晶性能的影響 ························································ 李 丹，肖作杰，趙 樂，馬 晨，趙永仙（3-10）

PVC/MBS/EVA共混物的制備及其抗紫外光老化性能 ······································································ 李文俊，張 勇（3-13）

DQC-602型催化劑的時間依賴性研究 ··································································· 齊 琳，張紀貴，王 宇，張?zhí)煲唬?-19）

一種新型聚丙烯催化劑載體的制備 ················································································· 凌永泰，夏先知，劉月祥（3-23）

納米TiO2銀交換粉體與檸檬酸改性LDPE薄膜的制備 ········································ 賈夢偉，唐亞麗，盧立新，王 軍，丘曉琳（3-27）

可生物降解PLA/St/BF復合材料的制備 ······································· 沈華艷，張會平，周盾白，謝 東，賈志欣，陳明周，羅遠芳（3-32）

相反轉工藝制備聚苯乙烯/聚酯共混物微球 ······························································ 段玉豐，王雨薇，付朝霞，馬勁松（3-36）

甲基鋁氧烷/鉬系催化劑催化苯乙烯配位聚合 ··············································································· 華 靜，武 歧（3-41）

高溫雙檢測器凝膠滲透色譜法表征聚乙烯 ········································································ 楊 芳，賈慧青，笪敏峰（3-46）

新型抗靜電PET纖維的制備 ·························································································· 李雪蓮，薛敘明，付永勝（3-49）

PLA/改性MMT復合材料的性能 ······················································································ 孫岳玲，董彥祥，沈發治（3-53）

長鏈乙烯酯改性聚乙烯醇的結晶動力學 ············································································ 陳 寧，胡繼鋒，李 莉（4-1）

食品級聚碳酸酯的光氧老化性能 ·············································· 周從恒，黃彥紅，李 丹，孔玲佩，郭 兵，高建國，趙永仙（4-6）

基于正交試驗設計的碳纖維對PA 12的靜電吸附 ························································· 董 特，馮 凱，李鑄國，陶 可（4-9）

PPR/Si-MGO復合材料的制備 ······································ 黃安平，李振友，鄒 欣，高 琳，張文學，劉永軍，朱博超，謝克鋒（4-14）

汽車內飾用低VOC含量聚丙烯復合材料的制備 ··············································· 閆 溥，李榮群，邵之杰，趙 東，汪 波（4-17）

單活性中心茂金屬催化劑催化乙烯與1-己烯共聚合 ·················································· 張 瑞，王文燕，王 華，王立娟（4-21）

質子酸催化制備三嵌段穩定劑PCL-PDMS-PCL ··············································· 鄧進軍，詹世平，商雪航，劉志軍，李志義（4-25）

活性炭對聚丙烯酸水凝膠pH敏感性的影響 ················································································· 楊 珊，侯玉龍（4-29）

SBS/無機剛性粒子對苯乙烯-丁二烯嵌段共聚物的增韌改性 ······························ 林士文，官煥祥，黃寶奎，陳平緒，李玉虎（4-33）

超聲功率對導電炭黑填充PA 66/PPO共混物性能的影響 ···································· 韋良強，孫 靜，黃安榮，董珈豪，石 敏（4-36）

ABMS樹脂的制備及性能 ········································································ 王 萍，任 陽，趙博文，任 亮，張明耀（4-40）

反相懸浮聚合法制備耐高溫吸水材料及其性能研究 ··················································· 王向鵬，鄭云香，張春曉，蔣秀燕（4-44）

偶聯劑KH570對吸油樹脂性能的影響 ················································ 李 楊，白琪俊，段攀峰，伍玉嬌，劉學金，趙 行（4-47）

納米TiO2改性PVDF超濾膜的制備 ····················································· 李小玉，何桂榮，柳瀅春，王 鵬，朱景培，劉國強（4-51）

烷基鋁預還原鉻釩雙中心催化劑的制備及其催化乙烯聚合 ··················································· 李文博，趙 檸，劉柏平（5-1）

Z-N催化劑用于原位合成球形聚1-丁烯/聚丙烯合金 ······························· 任合剛，榮麗麗，王登飛，王斯晗，高宇新，劉賓元（5-7）

新型負載型硅/鎂復合Z-N催化劑的制備及其催化1-丁烯聚合 ······································ 劉文旭，朱 偉，趙 檸，劉柏平（5-12）

含環氧基的氟涂覆劑的制備與應用 ··················································· 邢杰慧，羅惠澤，唐旭東，馬 馳，齊迎昊，孫思婷（5-16）

聚烯烴彈性體/碳納米管/炭黑復合材料的性能 ············································· 劉廣永，李雪健，祝孝天，張 偉，邱桂學（5-20）

α-二亞胺鎳催化劑催化乙烯溶液聚合的性能 ················································· 賴菁菁，高 榕，周俊領，李 巖，劉東兵（5-24）

異佛爾酮二胺/4,4'-二氨基二苯砜復合固化EP/CTBN ······························ 劉青松，任 亮，劉伯軍，朱福朋，趙博文，張明耀（5-28）

多價金屬與丙烯酸自交聯包覆改性鋁粉 ······························································· 龔德朋，馬騰飛，李德重，孫義明（5-33）

PPGDGE對二次固化環氧樹脂性能的影響 ····················································· 謝賀豐，艾嬌艷，黃樹彬，葉天焜，盧梓鏗（5-37）

PDMS-PEG核殼結構復合粒子的制備 ············································································· 孫迎迎，劉喜軍，婁春華（5-41）

乙烯氣相聚合工藝參數優化及反應過程的數學模型建立 ··········································································· 羅靜彥（5-46）

固體酸催化法合成壬基酚醛樹脂的新工藝優化 ································································· 肖先舉，唐學紅，王德堂（5-51）

磺酰鹵基羥丙基瓜爾膠的合成及其性能 ····················································································· 侯慧玉，曾廣勝（5-54）

高透明導光聚苯乙烯的開發 ························································································· 戴瑩瑩，王 艷，宋立臣（5-57）

鎂負載量對SiO2/MgCl2復合載體型Ziegler-Natta催化劑的影響 ················································· 諸 亮，何雪蓮，劉柏平（6-1）

主鏈含苯環十字型硅鈦樹脂的合成 ······································································· 武建華，姜愛葉，吳佳偉，張孝阿（6-8）

AlCl3/含氧引發劑催化體系合成中、高相對分子質量PIB ··········································· 陳 亮，朱志華，劉 振，劉柏平（6-13）

硅烷偶聯劑改性酚醛樹脂的合成 ··················································· 游勝勇，戴潤英，董曉娜，李 玲，陳衍華，曹 修（6-17）

PLA/H-MMT納米復合材料的微波輔助制備及反應動力 ······················································· 曹海雷，蔡奉穎，王 鵬（6-20）

RAFT沉淀法制備殺蟲脒分子印跡聚合物及其應用 ········································································ 馬鵬飛，韓生華（6-25）

陰離子開環聚合合成超高相對分子質量聚硅氧烷 ······························································ 漆 剛，姜會平，熊 婷（6-30）

熔融沉積成型PLA/麥秸粉復合材料的抗老化性能 ······························································ 畢永豹，楊兆哲，許 民（6-34）

黏土種類及用量對AA-AM-AMPS多孔型高吸水樹脂性能的影響 ································· 于 智，劉 闖，何 聚，楊 玲（6-39）

TPS/PVA共混物的熱降解行為 ·································································· 劉鈺馨，范麗蘭，莫羨忠，龐錦英，楊 芳（6-43）

聚丙烯酸鈉/沸石復合調濕材料的制備 ······················································································· 張珂峰，沈強儒（6-46）

聚氨酯/廢舊聚乙烯纖維復合材料的制備 ···················································································· 劉井紅，吳曉青（6-49）

工業技術

聚甲醛生產中的揮發分脫除 ·············································································································· 鄧立偉（1-52）

不同Ziegler-Natta催化劑對聚丙烯性能的影響 ···································································· 沈永斌，李 磊，黃 河（1-57）

DQS-1催化劑在Z30S樹脂生產中的應用 ································································· 張紀貴，夏先知，劉月祥，李威蒞（2-53）

LLDPE裝置高負荷運行瓶頸及優化措施 ······················································································ 毛文華，李立力（2-57）

氣相比及氫氣用量對聚丙烯合金性能的影響 ··················································· 劉小燕，侯景濤，王 海，盧曉瑋，董萬卓（3-56）

用BCL-100型催化劑在Innovene S工藝裝置上生產HDPE粉料的性能 ································ 劉志偉，秦 川，朱孝恒，曹 雷（3-61）

BCM-100H型催化劑在Horizone聚丙烯裝置上的工業應用 ······················································· 別朝暉，毛文華，靳鵬舉（3-64）

DQS-1催化劑的性能及工業應用 ······························································· 張紀貴，夏先知，劉月祥，李威蒞，齊 琳（3-68）

熟化工藝對G-ABS凝聚顆粒粒徑和致密度的影響 ·············· 劉 姜，王 亮，張 輝，梁皓月，李 睿，單崇杰，宋振彪，陸書來（3-73）

膜分離回收系統在全密度聚乙烯裝置上的應用 ·································································· 王 喆，于國濱，劉興旺（3-77）

聚丙烯斷裂標稱應變問題研究 ·································································································· 施紅偉，唐毓婧（4-56）

纖維專用聚丙烯氣味原因分析及生產建議 ····························································· 朱 軍，張 璐，龔樹鵬，胡廷芳（4-60）

特殊形狀小中空容器專用HDPE的開發 ·································································· 王世華，國海峰，郭 峰，于 波（5-61）

G-ABS膠乳連續凝聚過程及工藝分析 ······································· 劉 姜，王 亮，張 輝，劉文輝，閆柏郁，宋振彪，陸書來（5-65）

高密度聚乙烯淤漿環管工藝反應器黏壁原因及減緩措施 ································· 高勝利，王景方，惠 ，劉 浪，杜 浩（6-53）

高MFR抗沖擊共聚聚丙烯2240S的開發 ············································································ 王居蘭，田廣華，胡 琳（6-58）

加工設備與應用

微孔注塑成型過程的Moldflow模擬仿真 ······················································································· 韓 云，林有希（1-60）

基于田口實驗的快速冷熱成型MP4外殼注塑工藝優化 ···································································· 羅華云，馮永平（1-66）

Y型異型材氣輔共擠出脹大的三維等溫數值模擬 ··········································· 陳璐璐，柳和生，黃興元，黃楚曄，段翔宇（2-68）

Zigbee監控網絡下注塑機注塑性能穩定性及注塑產品質量 ···················································· 黃 鑫，王 秋，李忠武（2-73）

高流動抗沖共聚聚丙烯相結構的流變學 ·························· 婁立娟，王艷芳，張麗洋，杜 斌，陳商濤，姜 凱，俞 煒，黃 強（3-80）

羧基丙烯酸樹脂微乳液的制備及其在3D打印中的應用 ··························· 聶建華，程 江，楊卓如，吳皎皎，王 俊，戴春桃（3-85）

耐熱聚乙烯的加工性能 ··········································································· 馬小偉，喬亮杰，莫 明，胡廷芳，楊 帆（4-77）

低摩擦因數CPP熱封膜的研究 ··································································· 張莉瓊，劉曉艷，趙素芬，熊立貴，涂志剛（4-81）

制樣方法對等規聚丙烯連續自成核退火的影響 ·································································· 賈慧青，楊 芳，笪敏峰（5-84）

汽車內飾件收納盒的模具創新優化設計 ······················································································ 王 乾，徐自明（6-74）

結構與性能

PE100級管材專用樹脂的結構和性能 ·························································· 關 莉，胡 斌，朱 軍，席 軍，繆 江（1-70）

管材專用PE-RT的結構與性能 ·································································· 馬小偉，朱 軍，胡 斌，劉廣宇，龔毅斌（1-73）

抗沖共聚聚丙烯的組成及其結晶行為 ··································································· 施紅偉，劉宣伯，郭梅芳，宋文波（1-77）

低密度聚乙烯長支鏈含量的測定 ········································································· 王文燕，馬 麗，和樹立，郭桂悅（2-61）

管件專用HDPE的結構與性能 ··································································· 龔毅斌，朱 軍，朱新遠，胡 斌，吳春霜（2-64）

熱收縮膜專用低密度聚乙烯2420D的結構與性能 ······················································· 李冬霞，宋 磊，王 華，付 強（4-65）

透明易加工LLDPE的結構與性能 ···················································································· 李 瑞，葛騰杰，王世華（4-69）

管材專用耐熱聚乙烯的動態流變行為 ······································· 王群濤，高凌雁，郭 銳，王日輝，王雪梅，許 平，石 晶（4-74）

NMR研究不同牌號PE-RT和PE100管材的結構 ···························· 高凌雁，王群濤，郭 銳，王日輝，許 平，石 晶，侯 斌（5-70）

不同工藝生產的防水阻隔專用樹脂的結構與性能 ······················································· 王 華，楊 勇，韋德帥，張 瑞（5-74）

釜式法淤漿工藝生產的PE100級管材專用樹脂的性能 ···························································· 姜 平，路全能，劉 濤（5-77）

發泡劑和催化體系對軟質聚氨酯泡沫結構和性能的影響 ············································· 王 軒，魏 徵，王源升，王方超（5-80）

核磁共振法測定EVA中的VA含量和序列結構 ·························································································· 卜少華（6-63）

滾塑用交聯聚乙烯的結構與性能 ······························································· 任月慶，董 俠，陳學連，王篤金，梁文斌（6-66）

管材專用聚1-丁烯的非等溫結晶動力學 ····················································· 馬 麗，金 毅，王文燕，任合剛，張懷志（6-71）

綜 述

阻燃型聚酰胺66的研究進展 ················································································ 成沂南，田留華，呂文晏，崔益華（1-81）

BOPP薄膜專用樹脂的研發與應用進展 ············································· 譚魁龍，陳興鋒，袁 苑，汪乃東，蘇玉山，義建軍（1-85）

PPR低溫增韌改性研究進展 ················································································ 黃 凱，廖秋慧，張憶順，吳慧君（1-91）

建筑節能型相變微膠囊材料的研究進展 ··········································································· 張 婭，邰明明，張 敏（1-95）

APC技術在聚丙烯裝置上的應用 ·········································································································· 劉 屏（1-99）

聚氨酯泡沫阻燃技術的研究進展 ···················································································· 王方超，魏 徵，王源升（2-77）

Ziegler-Natta催化劑中各組分相互作用研究進展 ································· 謝克鋒，鄒 欣，張文學，高 琳，朱博超，黃安平（2-82）

生物基聚酰胺制備及應用研究進展 ················································································· 張龍貴，計文希，李 娟（2-86）

高聚物“結構控制”加工成型工藝研究進展 ·························································································· 王洪見（2-92）

DMTO裝置副產物C4綜合利用工藝的選擇與應用 ······················································································ 齊 薇（2-98）

石墨烯摻雜聚丙烯復合材料的制備、性能及應用研究進展 ······················· 袁祖培，陳 潔，唐俊雄，唐三水，李羽凡，張旺璽（3-88）

游艇用纖維增強復合材料在海洋環境下加速老化研究進展 ····················································· 李 萌，賓遠紅，李培芬（3-93）

現代塑料擠出設備自動控制研究進展 ··································································································· 呂秀亭（3-99）

自修復材料應用研究進展 ········································································································ 牛麗紅，鄧 利（4-85）

計算機仿真在塑料加工工藝優化領域的應用研究進展 ···································································· 陳鳳琴，陳宇剛（4-90）

SMA的合成及改性研究進展 ················································································································ 董淑春（4-94）

2009—2016年聚乙烯醇縮丁醛及其膜片市場分析 ···················································································· 季樹花（4-98）

汽車保險杠專用復合材料及其成型工藝研究進展 ······························································· 黃 凱，廖秋慧，陳 杰（5-87）

核磁共振波譜表征彈性體支化結構方法的研究進展 ···························································· 羅俊杰，卜少華，黃 鈴（5-92）

CAD/CAE一體化技術在塑料制品制造中的應用 ············································································ 謝日星，李文蕙（5-98）

低VOC含量塑料制備與加工技術及其在汽車內飾中的應用 ······································································· 褚松茂（5-102）

全密度聚乙烯生產工藝進展及市場現狀 ···························································································· 包七十三（5-106）

新型環三磷腈阻燃劑的研究進展 ········································· 李伶通，祝穎丹，劉 東，陳 剛，徐海兵，劉文慶，顏 春（6-78）

異構化PI單體的合成方法及其對PI tg的影響分析 ································ 高陽峰，劉小龍，榮衛鋒，徐興亞，夏 池，翟英文（6-84）

聚乳酸復合材料的研究進展 ····································································································· 王惠娟，楊麗娟（6-88）

塑料加工成型技術現狀及研究進展 ······································································································ 劉紅燕（6-93）

計算機輔助技術在塑料包裝設計中的應用 ··················································································· 章小丹，牛興霞（6-97）

簡 訊

茂名石化公司生產高端聚丙烯新產品 ············································································································ （1-15）

茂名石化公司生產出新型管材專用PPR ············································································································ （1-51）

中石油研發高端專用淤漿工藝聚乙烯催化劑 ··································································································· （2-63）

廣州石化聚丙烯新裝置投產 ························································································································ （2-97）

2016年我國多套新建聚丙烯裝置建成投產 ······································································································ （3-52）

寧波建世界單套最大氫化C9樹脂裝置 ············································································································ （3-72）

2016年我國聚丙烯進口量同比下降11.2% ······································································································· （3-76）

吉林石化建成國內首套PMMA中試裝置 ·········································································································· （3-84）

2016年我國聚碳酸酯進口量同比減少7.6% ······································································································ （3-98）

2016年我國聚氯乙烯的進出口量雙雙遞增 ······································································································ （4-68）

2016年我國聚乙烯的進出口量雙雙遞增 ········································································································· （4-76）

我國超高相對分子質量聚乙烯管材走向世界 ··································································································· （5-50）

中國石化啟動合成樹脂重大項目開發 ·············································································································· （6-7）

安徽建BOPA膜項目 ··································································································································· （6-12）

武漢乙烯產出聚丙烯新品 ··························································································································· （6-92）