第1期

不同液固動量交換系數模型對顆粒流化行為數值模擬的適應性·········孫銘陽，于傳兵，呂東，韋魯濱(1)

低品位菱鎂礦摩擦電選提純的試驗研究·······················趙小路，王海鋒，李垚，楊金山，彭真(9)

頁巖焙燒提釩過程中鉀物相轉化研究····································楊鑫龍，馮雅麗，李浩然(15)

基于石灰石法脫硫漿液的 K2S2O8氧化 Hg0性能······················田立江，劉秉坤，李杰，沈曉玲(23)

Ti6Al4V合金粉末高溫高壓成形過程中粉固界面及其耦合變形研究·················································季晨昊，郎利輝，黃西娜，孟凡迪，徐文才(29)

銀/稀土元素/碳微球抗菌劑的制備與表征····包芮于，余燕敏，張琴琴，王興欣，陳慧英，夏建新，李華(38)

基于位姿誤差補償?shù)娜娔X鑿巖臺車釬桿定位算法·········夏毅敏，李正光，羅建利，曾桂英，馬劼嵩(44)

無同步齒輪液壓振動錘系統的馬達泄漏特性及耦合同步條件···········羅春雷，唐志清，莫鑫，陳珍穎(52)

基于并聯機構的車載擔架及振動半主動控制研究·····················高翔，牛軍川，沈國棟，田莉莉(59)

基于冗余并聯機構的高性能機床設計與分析···························趙福群，郭盛，徐梓淳，李典(67)

基于 Prophet框架的銀行網點備付金預測方法······························李麗萍，段桂華，王建新(75)

基于軋制界面表面粗糙度特征的板帶軋機混合潤滑特性研究·····王橋醫，朱媛，過山，張秋波，池冰冰(83)

網絡化牽引控制系統H∞采樣控制及其應用····························陳剛，王信，羅昌勝，肖伸平(91)

錨具失效后后張法預應力簡支梁試驗研究·······························周凌宇，薛憲鑫，尹國偉(100)

砂土中松動土壓力及松動區位移破壞形式的試驗研究·······陳其志，郭生根，徐長節，梁祿鉅，劉興旺(108)

抗滑樁-加筋土擋墻組合支擋結構開發··································曹文昭，鄭俊杰，薛鵬鵬(118)

碾壓混凝土的動態力學特性分析及損傷演化本構模型建立··············張社榮，宋冉，王超，魏培勇(130)

水泥改良泥質板巖粗粒土的靜力特性·····································劉雨，陳俊樺，朱自強(139)

沖擊波和預制破片聯合作用下 H 型鋼柱抗爆設計·····································田力，張浩(146)

基于Prandtl破壞模式的吸力式沉箱基礎抗拔承載力極限分析上限解··朱文波，戴國亮，龔維明，趙學亮(158)

基于泥層高度的耙架扭矩力學模型及機理分析···············楊瑩，吳愛祥，王洪江，鐘常運，程海勇(165)

膏體料漿管道輸送中粗骨料顆粒運動規律分析·············顏丙恒，李翠平，吳愛祥，王洪江，侯賀子(172)

多破壞模式和二次受力影響下 FRP 加固 RC 梁抗彎承載力·························方圣恩，武棒棒(180)

再生混凝土-鋼筋黏結錨固可靠度設計·····························楊海峰，陳衛，張?zhí)鞂?，蔣家盛(189)

基于滲流應力耦合的基坑開挖受力特性及其對鄰近地鐵隧道的影響·······································黃戡，楊偉軍，馬啟昂，安永林，李依，周經偉，邱朗(198)

酸雨入滲對膨脹土抗剪強度的影響及微觀試驗研究·················常錦，楊和平，肖杰，毛瑞，童超(206)

微小圓管和方管中 H2/空氣燃燒極限的比較與分析································范愛武，袁自力(214)

基于動態水力平衡的集中供熱系統二次管網節能優化調節方法研究····周璇，劉國強，王曉佩，閆軍威(220)

復合軌枕有砟軌道動力性能試驗研究·················趙振航，沈毓婷，魏強，江萬紅，耿浩，李成輝(234)

四輪獨立驅動電動汽車行駛狀態級聯估計·······················陳特，陳龍，蔡英鳳，徐興，江浩斌(241)

第2期

不同轉速率下球磨機內鋼球的碰撞研究·······李騰飛，林蜀勇，張博，張家明，焦芬，覃文慶，張雁生(251)

濕法煉鋅廠針鐵礦渣的表征···········································李玉虎，高祿鵬，劉志宏(257)

雙層陽極微生物燃料電池系統降解偶氮染料及同步產電···········汪蓮，曹羨，馮羽中，張毅，李先寧(264)

纖維增強金屬層板零件充液成形過程及工藝分析···········劉世琛，郎利輝，關世偉，繩斯佳，曾一畔(272)

前體物和誘導子對內生真菌CH1產乙基長春胺的影響···················任娜，劉佳佳，楊棟梁，徐士杰，欒明寶，趙娜娜，彭櫻子，吳義強，袁光明(279)

雙重螺旋法齒面分區修形對降低安裝誤差敏感性的影響·····················嚴宏志，吳順興，肖蒙(286)

交流電力測功機運行狀態的混沌預測與異常診斷····················鐘定清，王艾倫，何謙，魏克湘(295)

天然氣水合物輸送管道的壓力損失規律·································徐海良，胡文港，楊放瓊(304)

弛張篩面動態特性數值模擬及參數優化···········武繼達，劉初升，王振乾，江海深，鄒夢麒，邱文強(311)

基于 OpenFOAM 重力式采樣器自由下落姿態數值分析·················馬哲，孔丹雅，王胤，翟鋼軍(321)

蒸餾水中 TC4 合金微動磨損特性····································宋偉，孫璐，景鵬飛，俞樹榮(328)

運動單站單基線解模糊定位算法····································郭立民，謝強，陳濤，王夢馨(336)

基于粒子群的改進智能算法在載荷識別中的應用······················謝兵，謝博群，張猛，曲先強(343)

預制表面裂隙砂巖的動態力學特性及破壞模式······················吳浩，趙國彥，梁偉章，王恩杰(350)

基于天線收發距的盾構壁后注漿雷達探測試驗研究···胡盛斌，徐國元，馬富安，唐甫，容繼盤，鐘有信(360)

硫化礦石堆自熱的混沌特征···················伍智偉，潘偉，吳超，李孜軍，李明，劉正洲，馮宴熙(368)

階段嗣后充填采場結構參數的多目標多屬性優化···························蘭明，劉志祥，李夕兵(375)

虹吸排水抗淤堵能力模型試驗與理論分析··························汪磊，尚岳全，呂俊俊，徐浩迪(384)

樁基施工對鄰近既有地鐵隧道影響的數值分析······································丁智，張霄(390)

粉砂巖路塹高邊坡施工監測與動態設計····························汪益敏，王兆陽，李奇，陶子渝(400)

側向沖擊下方鋼管混凝土構件動力響應的參數研究·············蔡健，余瑜，陳慶軍，李玉楠，葉嘉彬(409)

沖擊荷載作用下巖石壓動態和拉動態損傷模型···························謝福君，張家生，陳俊樺(420)

圓鋼管 UHPC 短柱軸壓承載力與變形能力計算模型··················王震，王景全，劉桐旭，修洪亮(428)

地下破碎礦體數值計算模型的構建及采場結構參數優化·······劉冬，邵安林，金長宇，丁成功，范富泉(437)

飽和粉質黏土動彈性模量影響因素分析及骨干曲線模型研究·····················莊妍，朱偉，張飛(445)

土質邊坡降雨入滲深度及飽和區變化規律·····················劉杰，曾鈴，付宏淵，史振寧，張永杰(452)

單向拉伸應力狀態下瀝青混合料強度和剛度特性·········黃拓，漆帥，蔣浩浩，黃謀英，李咪，李亦鵬(460)

燒結冷卻廢氣余熱有機朗肯循環發電系統性能分析······················馮軍勝，裴剛，董輝，張晟(466)

帶彈性分隔板的低雷諾數圓柱繞流尾跡演化特性······························皇甫宇澄，孫志強(474)

超高壓噴射條件下非常態燃油缸內噴霧特性···············劉琦，劉云生，陳新傳，霍柏琦，歐陽光耀(480)

考慮材料失效準則的吸能裝置失效行為與碰撞特性·······馮悅，肖守訥，朱濤，楊冰，陽光武，車全偉(487)

第3期

攀枝花直接還原鈦渣的礦物學特征································王伊杰，薛亞洲，潘懋，文書明(497)

鈉鹽強化某低品位鐵礦含碳球團還原機理························鐘榮海，黃柱成，易凌云，漢合童(506)

Al2O3對釩鈦高爐渣冶金性能的影響及黏度預測模型············梁海麗，馮聰，儲滿生，唐玨，王挽平(514)

原位水解/熔融擴散法制備鈦酸鋰/硫復合正極及其在全固態鋰電池中的應用········杜英，李劼，劉晉(521)

平面磨削條件下溫度閾值對殘余應力形成的影響···························溫俊，唐進元，鄭金超(530)

不同動靜載荷組合作用下盤形滾刀破巖機制·······························張桂菊，譚青，勞同炳(540)

基于多相流理論高速動車組齒輪箱密封系統分析·····························張雨，張開林，姚遠(550)

混合鏈?zhǔn)揭簤赫{(diào)平機構的動力學特性···································康輝梅，朱建新，王石林(557)

雙旋翼無人機串級線性自抗擾控制·························張勇，陳增強，張興會，孫青林，孫明瑋(564)

一種基于內外環結構的四旋翼飛行器容錯控制方法································鄭佳靜，李平(572)

用于卷積神經網絡圖像預處理的目標中心化算法······················董秋成，吳愛國，董娜，馮偉(579)

虛擬數據代理云模型構建及數據布局·················胡志剛，張欣欣，鄭美光，常成龍，李佳，楊柳(587)

四川盆地外復雜地質條件區海相頁巖氣“甜點區”優選：以湘西北地區古生界為例·······················秦明陽，郭建華，黃儼然，焦鵬，劉辰生，鄭振華，張良平，郭軍，曹錚(596)

巴布亞盆地東部中侏羅統—下白堊統烴源巖評價及勘探建議···············································劉湘，郭建華，劉辰生，曠理雄，李杰，張振(607)

基于時間序列與 GWO-ELM 模型的滑坡位移預測··············廖康，吳益平，李麟瑋，苗發盛，薛陽(619)

滑移支座摩阻效應對高速鐵路大跨度橋梁梁軌相互作用的影響·············劉文碩，戴公連，秦紅禧(627)

動態地下水位變化引起的基坑底抗?jié)B流穩定性計算新方法············章麗莎，應宏偉，王迪，謝康和(634)

動荷載作用下凍結黏土破壞特性試驗研究···················栗曉林，王紅堅，鄒少軍，江聰，牛永紅(641)

深埋地下硐室破壞模式與圍巖壓力上限解·······························張道兵，馬宗宇，劉智振(649)

基于附面層理論的路基熱邊界模型······························羅曉曉，俞祁浩，馬勤國，張建明(658)

基于井筒-射孔模型的地層破裂壓力及起裂角的理論研究·····范勇，趙彥琳，朱哲明，周昌林，張憲尚(669)

干濕循環條件下水泥改良泥質板巖粗粒土的靜力特性試驗研究···············劉雨，朱自強，陳俊樺(679)

基于受壓裂隙開裂準則的損傷模型·······································馬秋峰，田靜，周天白(687)

全風化花崗巖富水地層注漿治理研究與應用·······························齊延海，李術才，李召峰，張慶松，楊磊，張健，林榮峰，王凱(694)

混凝土結構三維非線性徐變效應分析方法·······························李世偉，楊永清，陳遠久(704)

非飽和粗粒土基質吸力與含水率及級配關系試驗研究·······何忠明，劉雅欣，曾新發，劉登生，職孟林(712)

球形顆粒垂直管水力提升壓力波動特性檢測····································關海榮，孫志強(719)

廣義一維勢中熱聲制冷微循環的性能分析··········································鄂青，吳鋒(726)

含醇汽油的燃燒與排放特性對比試驗研究·····················李煜，龔金科，袁文華，伏軍，李光明(734)

板式無砟軌道 CA 砂漿黏彈性特征···················任娟娟，李浩藍，杜威，鄧世杰，田根源，巫江(743)

第4期

基于偏移活化能對 SiC 球團干燥進行動態分析·················李建，付曉恒，李軍，張玉靜，石應杰(753)

辛基羥肟酸在氟碳鈰礦表面的吸附機理···············王介良，曹釗，王建英，張雪峰，雷霄，馮宏杰(762)

頂吹浸沒攪拌中液相混合過程的可視化·····················張漢，張小輝，鄧偉鵬，張廣君，閆紅杰(771)

可見光條件下鐵酸鉍還原水中Cr(Ⅵ)效果分析···李偉，張永麗，郭洪光，劉楊，程鑫，唐煒鴻，趙蘋菊(780)

基于反沖洗鐵泥制備的磁性吸附劑除砷及再生···················曾輝平，尹燦，盛加寶，李冬，張杰(787)

金剛石繩鋸用 Fe 基預合金粉代 Co 性能·········································劉志環，張紹和(796)

退火溫度對純鈦 TA1 織構及各向異性的影響········張貴華，江海濤，吳波，楊永剛，田世偉，郭文啟(806)

鋅白銅攪拌摩擦焊接頭顯微組織與力學性能··········周利，閔婕，雷淑貴，賀文雄，黃永憲，馮吉才(814)

Au-Sn 焊點異質界面的耦合反應及其對力學性能的影響·····朱學衛，韋小鳳，黃玉祥，衛啟哲，程小利(821)

深海揚礦泵內部非定常流體徑向力研究···································趙賀，劉少軍，胡小舟(829)

海底天然氣水合物水力提升系統參數和提升性能作用規律·················徐海良，胡文港，楊放瓊(837)

計入絲間接觸的鋼絲繩股軸向力學性能半解析法研究··············張曼曼，陳原培，孟凡明，龔憲生(845)

多軸車輛輪橋加載試驗臺的解耦控制實驗研究·······························王慧，趙國超，金鑫(854)

基于新型雙功率流差速轉向機構的履帶車輛轉向性能····················石志標，劉江，高峰，曾文(864)

四旋翼直升機的線性自抗擾與非線性 H2/H∞混合控制·················劉俊杰，高強，孫明瑋，陳增強(873)

基于免疫調節機制的參數自整定模糊控制器設計···························劉寶，葉會會，蔡夢迪(881)

熱定型過程彈力針織物熱塑性應變模型研究······················周麗春，劉順菁，金福江，楚貝貝(892)

基于幅值追蹤法的航空電磁波形優化控制···················于生寶，宋樹超，許佳男，張嘉霖，陳旭(900)

巖心激發極化實驗系統研究···························賈將，柯式鎮，張冰，康正明，李君建，孫旭(908)

遼河盆地大洼油田火山巖特征及其測井識別方法·······肖明國，郭建華，焦鵬，郭祥偉，吳詩情，譚慧(915)

裝配式 UHPC 防船撞耗能裝置的性能·····································周凌宇，濮星旭，衛軍(923)

加筋護坡路堤沉降特性及其控制指標研究···········楊果林，段君義，胡敏，羅光財，邱明明，林宇亮(931)

溶浸作用下稀土礦力學弱化規律研究···陳勛，齊炎，尹升華，李希雯，謝芳芳，劉伽偉，陳威，嚴榮富(939)

粉質黏土隧道超前支護效應試驗研究·········李術才，陳紅賓，張曉，龔英杰，李會良，丁萬濤，王琦(946)

深部地質處置地下實驗室花崗巖的加卸荷三軸蠕變試驗與分析···································丁炎志，張強勇，張龍?jiān)疲蚊餮?，尹相杰，王斌，余光遠(957)

裂隙對含孔洞砂巖力學及損傷演化特征的影響·················周軍華，楊坤，房凱，趙同彬，邱東衛(968)

考慮荷載與浸水條件的預崩解炭質泥巖變形試驗·······陳小薇，曾鈴，付宏淵，劉杰，陳少壯，劉大順(976)

新型雙層 CRCP 結構及在城市道路中的應用····························李盛，楊帆，劉萌，陳尚武(983)

低雷諾數開縫圓柱繞流尾跡流場特性··········································邢鵬飛，孫志強(990)

基于改進遺傳算法的海上風電場消納拓?fù)浣Y(jié)構優化模型··············趙東來，牛東曉，楊尚東，梁才(998)

雙線橋上CRTS Ⅱ型板式無砟軌道結構涂刷反射隔熱涂層影響分析·····································劉學毅，楊吉龍，姜恒昌，康維新，楊榮山，李振庭(1005)

第5期

高壓輥磨超細粉碎對釩鈦磁鐵礦分選的影響··············郭小飛，代淑娟，朱巨建，李麗匣，王洪彬(1013)

多功能鐵水包熔化廢鋼的計算及分析·······························楊光，鄧帥，徐安軍，戴曉慶(1021)

移動式打磨作業粉塵分布規律及其影響因素·······················蔣仲安，高康寧，陳記合，蘭桂(1028)

稀土熔鹽渣碳酸鈉焙燒轉型機理及浸出規律··························楊幼明，李柳，肖敏，牛飛(1035)

均勻化工藝對Al-4.46Mg合金腐蝕和疲勞性能的影響··········································王在玲，鄧運來，伍鵬飛，孫琳，戴青松，葉凌英(1042)

晶粒組織對 Al-Zn-Mg 合金抗應力腐蝕性能的影響·········葉凌英，姚學彬，唐建國，李紅萍，張新明(1049)

固溶溫度對 Ag2205 雙相不銹鋼組織與性能的影響·······················向紅亮，陳盛濤，鄧麗萍(1056)

機器人柔彈性仿生電子皮膚研究進展·················邱瀾，曹建國，周建輝，江軍，王曉玲，繆存孝(1065)

玻纖增強聚丙烯與尼龍 66 模內混合加工成型實驗研究···············符亮，蔣炳炎，吳旺青，閔麗萍(1075)

一種新的直齒輪復合修形設計方法···········································楊碩文，唐進元(1082)

大功率高壓開關電源變壓器的損耗分析及散熱控制···黃毅，彭可，王文潮，陳練，董密，邵添，雷佳豪(1089)

基于有限集模型預測的電機模擬器故障電流跟蹤方法··············彭濤，劉博，楊超，秦瑞，陽春華(1098)

基于 3D 打印技術的分層凝膠注模制造工藝····························劉恩辰，葛動元，羅信武(1105)

同分布強化學習優化多決策樹及其在非平衡數據集中的應用·········焦江麗，張雪英，李鳳蓮，牛壯(1112)

隧道充填巖溶管道滑移失穩突水機制····························黃震，李仕杰，趙奎，吳銳，鐘文(1119)

不同加載速率下巖石紅外輻射效應的試驗研究·······························周子龍，常銀，蔡鑫(1127)

向量式有限元面內逆向轉角計算方法······················王雙炎，李聰，楊玉龍，龐志成，湯晗青(1135)

不均勻級配砂土滲蝕過程的細觀數值模擬························蔡袁強，張志祥，曹志剛，嚴舒豪(1144)

近爆沖擊波和破片復合作用下預應力鋼筋混凝土空心板梁的損傷效應分析···········田力，李永欣(1154)

含腐蝕及橢圓度缺陷管道的動態屈曲傳播研究·····································李牧之，余建星，余楊，段晶輝，韓夢雪，李楊，于佳暉(1165)

膏體濃密床層孔隙結構剪切演化與連通機理··············焦華喆，王樹飛，吳愛祥，王貽明，楊亦軒(1173)

落礦沖擊作用下礦柱結構參數優化與穩定性分析···········于清軍，李元輝，劉照朋，紀曉飛，彭康(1181)

水力耦合作用下三維中空裂隙擴展模式與材料破壞強度的試驗研究·······························李邦翔，朱維申，楊磊，虞松，梅潔，蔡衛兵，張強勇，陳云娟(1192)

活性粉末混凝土梁柱節點抗裂性能試驗研究······················鞠彥忠，沈浩，王德弘，鄭文忠(1203)

高應力泥質粉砂巖黏彈塑性蠕變模型···············劉新喜，李盛南，徐澤佩，李玉，高學文，王瑋瑋(1210)

滲透力對新奧法隧道掌子面穩定性的影響·······黃戡，安永林，岳健，曾賢臣，李佳豪，張藝杰，王棟(1221)

橡膠顆粒瀝青砂非線性蠕變模型試驗研究····················劉浩軒，曾國偉，白凡，吳亮，鄭華升(1229)

水泥回轉窯物料流動與傳熱特性數值模擬···························劉彬，周武洲，趙朋程，李瑞(1235)

實度與轉動慣量對垂直軸風力機性能的耦合影響···王旱祥，馬文龍，于洪棟，張金玲，姚明建，張立軍(1244)

乙酸在方解石表面吸附的密度泛函研究·················柴汝寬，劉月田，楊莉，辛晶，徐萬里，馬晶(1252)

軌道交通周期型聲屏障帶隙特性及其降噪性能··················易強，王宇航，高鑫，趙才友，王平(1263)

第6期

錫石多金屬硫化礦工藝礦物學及磨礦優化·········周文濤，韓躍新，李艷軍，孫永升，楊金林，馬少健(1271)

利用 V2O5制備氮化釩鐵的反應過程及動力學研究·········王斌，李冬，杜金晶，朱軍，劉漫博，王歡(1278)

70 t單管 RH 冶金傳輸行為的數值模擬·································竇為學，雷洪，朱苗勇(1284)

分級混凝過程的效能與影響因素·························杜鵬，李星，楊艷玲，蘇兆陽，方曉博(1291)

基于智能算法的預成形模具優化設計···············王夢寒，楊永超，郭濤，王周田，周文武，肖貴乾(1298)

含 BaSO4鈷基自潤滑復合材料的制備及高溫摩擦學性能···········王文杰，崔功軍，楊振偉，師睿博(1306)

壓縮載荷下織構對冷軋和退火銅板力學行為各向異性的影響·······································王仁可，陳志永，邵建波，肖柱，劉楚明，唐建國(1314)

使用 P204 從甲基磺酸溶液中萃取銦的研究············何靜，李楊剛，柳濤，廖方文，陳永明，楊聲海(1320)

爐體冷卻壁黏結物物相及形成機理······················馬恒保，張建良，焦克新，周云花，但家云(1326)

多級組合型大角度變幅機構的動力學特性················朱振新，朱建新，唐博豪，顧林坤，錢奐云(1334)

剛度連續、單調且光滑變化的粗糙界面法向彈塑性接觸模型···············肖會芳，孫韻韻，徐金梧(1343)

基于更新 Kriging 模型的雙重螺旋法加工齒面的重構方法············鄧辰，嚴宏志，陳義忠，伊偉彬(1351)

油氣懸掛缸的力學特性數學模型構建方法··········于子良，楊玨，馬源，殷玉明，SUBHASH Rakheja(1357)

軋制參數對楔橫軋變截面等內徑空心軸晶粒粒徑的影響·············余璇，彭文飛，虞春杰，束學道(1364)

基于概率神經網絡的電子油門踏板故障診斷····························蔣玉秀，趙曉歡，鄧元望(1370)

搜索引擎結果展示效果自動評價方法··········································張輝，馬少平(1378)

熱管在青藏高原多年凍土區高速公路應用中的適用性評價·············孔森，溫智，吳青柏，王大雁(1384)

凍融和干濕作用下表生板巖的劣化行為與機制·······················吳國鵬，諶文武，崔凱，王珮(1392)

考慮巖體完整程度影響的爆破破裂范圍······························謝福君，張家生，陳俊樺(1403)

基于 Normal分布的巖石統計熱損傷本構模型研究······朱振南，蔣國盛，田紅，吳文兵，梁榮柱，竇斌(1411)

基于聲發射實驗層狀砂巖力學特性及破壞機理···劉運思，王世鳴，顏世軍，傅鶴林，陳琛，史越，岳健(1419)

尾礦濃密中泥層沉降速度變化及顆粒沉降特性···················侯賀子，李翠平，王少勇，顏丙恒(1428)

銹蝕鋼筋混凝土框架地震損傷性能研究·······························劉小娟，蔣歡軍，郭子雄(1437)

裂縫長度對盾構隧道管片結構破壞模式模型試驗研究·······································劉川昆，何川，王士民，馬杲宇，郭文琦，盧岱岳(1447)

爆破振動作用下斷層破碎帶抗剪強度的劣化規律試驗研究··················吳廷堯，周傳波，蔣楠(1457)

風化巖地基中玻璃纖維增強聚合物抗浮錨桿體系受力特性數值模擬·················································白曉宇，張明義，匡政，閆楠，賈科科(1466)

微生物驅數值模擬研究進展······················王天源，修建龍，崔慶鋒，黃立信，馬原棟，俞理(1474)

分裂導線覆冰的數值分析與實驗研究························何青，李軍輝，張暕，鄧夢妍，杜冬梅(1485)

雙變量試差算法及其在循環水系統中的應用·····································孟志強，張沛(1492)

考慮輔助停車區約束的中速磁浮列車速度曲線節能優化方法·········································柴曉鳳，劉軍，賴晴鷹，孟令云，丁文亮，徐亞之(1499)

第7期

添加劑對硫化銅礦生物浸出規律的影響························陳威，尹升華，齊炎，陳勛，王雷鳴(1507)

QCM-D研究淀粉和油酸鈉與磁鐵礦的吸附機理··謝冬冬，侯英，黃貴臣，陶東平，韓呈，王曉麗，靳達(1514)

異辛酸鎳的電化學合成····························楊聲海，李為輪，吳彥增，王長紅，陳永明(1521)

銅浮渣富集熔煉過程金屬分配行為···········肖輝，謝博毅，陳霖，王志雄，劉偉鋒，張杜超，楊天足(1527)

鎳鈷基高溫合金的氧化動力學與界面結合性能···········宋正奇，李志強，鄭緒東，沈明明，鄒儉鵬(1537)

礦渣-鋼渣基膠凝材料固砷機理··························鄢琪慧，倪文，高巍，李云云，張鈺瑩(1544)

鎂合金筒形件拉深成形的臨界壓邊力························楊柳，官英平，姚丹，段永川，高安娜(1551)

輸入轉速波動下斜撐離合器的動態接合特性······嚴宏志，田昊，朱楚，李智，秦娟，劉建睿，王志標(1558)

深海礦石輸送設備工作性能··········································徐海良，饒星，楊放瓊(1567)

考慮彈簧應力松弛的高壓斷路器運動特性·············黎小峰，巫世晶，李小勇，趙燈，李巧全，李星(1575)

新一代高技術寬帶鋼冷軋機全機組一體化板形控制·····曹建國，江軍，邱瀾，李艷琳，何安瑞，張勇軍(1584)

圓柱齒輪分扭傳動系統的均載特性及試驗研究···············靳廣虎，龍珊珊，高鵬，潘磊，朱如鵬(1592)

基于視覺顯著特征的光學與SAR影像快速粗配準方法························華麗，徐川，眭海剛(1602)

多核微處理器體系結構級功耗模型分析·······························陳卓，劉暢，侯申，郭陽(1611)

基于偽高動態范圍的圖像拼接預處理方法··················吳亮紅，孫亮，周博文，張紅強，盧明(1619)

東營凹陷陡坡帶鹽斜229地區沙四上亞段砂礫巖油藏成藏控制因素·············解強旺，王艷忠，操應長，王淑萍，李宇志，王欣，李橋，葸克來，弭連山，郭迎春(1626)

石墨烯在瀝青復合材料中的研究現狀············張霞，黃剛，周超，袁小亞，賀俊璽，馮曼曼，劉昭(1637)

偏心堆載引起的盾構隧道橫向受力理論計算················魏綱，洪文強，魏新江，林心蓓，王立忠(1645)

基于蒙特卡洛和BIM的CRTSⅢ型板式無砟軌道鋪設工期仿真············································王衛東，雷曉鳴，杜香剛，王繼軍，賀小剛(1655)

套筒長度對加筋碎石樁復合地基路堤變形和穩定性的影響·········陳建峰，李良勇，徐超，馮守中(1662)

絮團稠化對全尾砂濃密性能的影響························周旭，王洪江，吳愛祥，曹炎森，牛鵬(1670)

考慮剪切接觸與碎屑充填的裂隙滲流模型與數值分析·······························潘東東，李術才，許振浩，杜毓超，施雪松，高斌，王文揚(1677)

拱頂背后空洞影響下非對稱連拱隧道結構裂損規律············閔博，張成平，張旭，宮艷萍，元騰飛(1686)

基于U曲線法的半?yún)?shù)模型中正則化參數確定······················周巖，靳奉祥，梁慶華，馬德鵬(1696)

凍結方式對預凍甘露醇冰晶粒度分布的影響····························賈穎姣，劉志強，羅春(1704)

超疏水表面液滴凍結初期凍結行為傳遞特性···································羅倩妮，梁彩華(1712)

一種用于內燃機排氣能量回收的新型布雷頓循環系統········周峰，付建勤，劉敬平，唐琦軍，朱國輝(1719)

射流溫度對高溫氣體射流控制壓縮著火的影響········祝佩，田華，孟相宇，崔靖晨，田江平，隆武強(1729)

考慮不確定性和儲能系統的虛擬電廠與能效電廠聯合調度優化模型及仿真應用·····················································牛東曉，趙東來，楊尚東，劉龍珠(1736)

基于能量守恒法測試汽車的空氣阻力系數·····························平培力，杜偉濤，胡玉梅(1744)

改進bang-bang控制的磁流變阻尼鋼彈簧浮置板軌道基頻的減振效果··················································韋凱，牛澎波，趙澤明，李懷龍，杜香剛(1750)

第8期

耐受全氟辛酸細菌的篩選及其對脅迫的生理響應········易浪波，柴立元，彭清忠，唐崇儉，周璐璐(1759)

銻酸鋰與六氟銻酸鋰制備新技術集成······················劉偉鋒，唐攢浪，陳霖，張杜超，楊天足(1768)

兩段焙燒強化含錸低品位鉬精礦的氧化分離························鄧瓊，范曉慧，甘敏，陳許玲(1778)

一種基于動態電阻測量的鐵礦粉同化性檢測新方法···錢立新，春鐵軍，龍紅明，李寧，王毅璠，余正偉(1787)

小球藻生長及協同凈化畜禽養殖廢水研究·························朱中強，何雪，薛夢婷，余冉(1795)

柔性有機硅疏水涂層的制備及其抑菌活性···········沈啟慧，單驛軒，連朋亮，劉巖，于東冬，周建光(1802)

基于逆向擬合法的H13鋼J-C本構修正模型·······························張靜，張松，李斌訓(1808)

循環扭轉剪切下圓筒內硬球顆粒的致密化行為·····················歐陽鴻武，雷剛，唐昕，孟力平(1816)

泥水盾構刮刀刃型與安裝角對刮刀切削性能的影響·····夏毅敏，沈烽，陳松濤，陳鵬，孫旭濤，寧波(1824)

室內動態環境下的移動機器人自主避障策略·························楊明輝，吳垚，張勇，肖曉暉(1833)

齒輪箱浸油潤滑流場及溫度場仿真分析····················鮑和云，范永，朱如鵬，陸鳳霞，靳廣虎(1840)

翼縫形狀對垂直軸風力機翼型氣動性能的影響·················張立軍，馬東辰，顧嘉偉，江奕佳，米玉霞，趙昕輝，王旱祥，劉延鑫，劉靜(1848)

具有直接鏈路的能量收集認知協作中繼網絡中斷概率分析········羅軼，施榮華，董健，唐錕，王雨婷(1857)

基于固有頻率的梁結構疲勞損傷演化規律······································衛軍，杜永瀟(1866)

高頻沖擊中心孔巖石損傷模型及試驗研究································吳萬榮，姚壵，劉智(1876)

各向異性成層邊坡的穩定性分析·································羅凌暉，周建，蔡露，溫曉貴(1883)

單軸壓縮下孔洞砂巖細觀破裂演化規律······················趙國彥，王恩杰，吳浩，邱菊，戴怡文(1891)

縱筋銹蝕對鋼筋混凝土梁抗剪性能影響的試驗研究················黃天立，趙志彥，宋力，王寧波(1901)

各向異性介質中地震波參數反演及其在隧道不良地質預報中的應用···············································何現啟，彭凌星，魯光銀，朱自強，高峰(1912)

不同方向沖擊加載作用下含裂紋巷道的破壞行為·········周磊，朱哲明，范勇，劉瑞峰，鄧帥，董玉清(1921)

含水率對黃土滲氣性影響及其微觀機理··················劉錦陽，李喜安，郭澤澤，黎澄生，馬馳洋(1930)

基于顆粒接觸理論的巖石壓密階段本構模型····················馬秋峰，秦躍平，周天白，楊小彬(1941)

深埋隧洞三岔口圍巖穩定性計算理論·················饒軍應，謝財進，趙霞，劉燈凱，聶崇欣，劉寧(1949)

震損可原位修復鋼橋墩設計及其抗震性能························呂英婷，郭子雄，劉陽，黃群賢(1960)

脆性巖石應力-應變?nèi)^程聲學特征演化規律··············張國凱，李海波，王明洋，鄧樹新，王振(1971)

生物酶改良膨脹土的應力-應變關系···············陳永青，文暢平，方炫強，陳宗輝，孫政，王解軍(1981)

全長黏結GFRP抗浮錨桿拉拔特性分析·······················白曉宇，張明義，匡政，王永洪，閆楠(1991)

基于數據驅動的過熱蒸汽溫度系統模型辨識····························王歡，饒政華，廖勝明(2001)

GDI超高壓噴霧撞壁特性的激光可視化··許鍇，衛立夏，裴毅強，王晨晰，李翔，李俊啟，葉自旺，許貝(2009)

含Cd油菜稈熱解實驗研究·······················蔡攀，蔣紹堅，彭好義，朱明偉，王凱，王浩，劉僖(2018)

溶液預凍方式與冰晶粒度分布之間的關系························賈穎姣，余云霞，劉志強，羅春(2026)

長短葉片對射流式自吸離心泵性能的影響···············董亮，潘琦，劉厚林，代翠，徐建紅，徐海良(2033)

路基凍脹—融化—沉降循環作用下板式無砟軌道受力與變形分析···············································向俊，林士財，余翠英，袁鋮，陳林，楊海明(2043)

第9期

銅冶煉含砷廢水水熱臭蔥石沉砷及亞穩態鐵物相轉化行為···········································張俊，李存兄，魏昶，鄧志敢，李興彬，張鵬(2053)

加熱工藝對Nb-Ti微合金化高強鋼的影響························梁文，吳潤，胡俊，杜濤，尹云洋(2063)

低品位高硫鋁土礦脫硅精礦溶出及微觀結構演變···吳鴻飛，夏飛龍，李軍旗，陳朝軼，徐樹濤，張仕恒(2074)

擴散法制備Al2O3彌散強化銅-錫合金粉末及其表征·····················閆志巧，陳峰，劉詠，汪濤(2084)

微流控芯片微通道復制度的表征及在注塑成型中的應用···········閔麗萍，蔣炳炎，朱來余，李湘林(2091)

螺栓固結界面接觸剛度的虛擬材料建模························肖會芳，孫韻韻，徐金梧，邵毅敏(2100)

不同輪緣間隙下混流泵旋轉失速特性···············平元峰，施衛東，李偉，季磊磊，李恩達，馬凌凌(2109)

一種新型并聯灌注機器人動力學分析與仿真·····························楊會，房海蓉，方躍法(2118)

機器人化鉆錨車鉆臂工作空間分析及軌跡規劃·························郝雪弟，景新平，張中平，謝勇厚，張境麟，劉冰，梁澤楠，吳淼(2128)

螺紋硬態旋風銑削軸承鋼GCr15切屑形貌及特性試驗研究·········································何彥，白云龍，李麗，王禹林，李育鋒，易力力(2138)

基于模糊聚類方法的S700K轉轍機故障診斷··································劉新發，魏文軍(2148)

基于量化控制的網絡系統穩定性分析······································陳剛，陳云，王煒(2156)

RGB-D與MeanShift相結合的實時目標跟蹤························王廣龍，田杰，朱文杰，方丹(2163)

基于泛在位置數據的城市道路網精細建模···········鄧敏，佘婷婷，黃金彩，劉慧敏，張建國，鄭旭東(2171)

基于特征參數的頻率域海洋可控源電磁數據反演影響因素分析·················韓波，李剛，劉穎(2184)

道面結構剛度和地基不均勻性對飛機荷載下道基附加應力的影響·········黃博，王宇，趙云，凌道盛(2195)

熱處理對凍結砂巖物理力學性質的影響·············金愛兵，吳常貴，趙怡晴，王本鑫，孫浩，趙安宇(2207)

基坑開挖對下臥地鐵隧道影響的解析計算方法·····劉建文，施成華，雷明鋒，彭立敏，曹成勇，林越翔(2215)

膨潤土膨脹力長期衰減特性的數值分析································李曉月，姜昊，徐永福(2226)

板巖質砂土-混凝土界面剪切特性研究···················周怡，彭振斌，尹泉，陳樂求，陳娟，張闖(2233)

方鋼管豎向插板加強節點受壓承載性能分析················常鴻飛，徐瑋，左文康，劉帥鵬，夏軍武(2242)

高速鐵路連續梁橋橫向地震碰撞效應及擋塊間隙研究····················楊孟剛，王傳坤，喬建東(2252)

混合骨料級配對充填料漿離析的影響··························溫震江，高謙，陳得信，王永定(2264)

基坑開挖引起下臥盾構隧道轉動與錯臺變形計算·································魏綱，張鑫海(2273)

加錨砂巖單軸力學特性及屈曲型巖爆控制機制··················王斌，寧勇，馮濤，王衛軍，郭澤洋(2285)

強降雨影響下破碎復理巖地層隧道洞口段失穩機理·············高陽，孫浩凱，劉德軍，徐飛，張騫(2295)

油菜稈熱解過程中重金屬形態研究·····················朱明偉，蔣紹堅，付國富，蔡攀，王凱，王浩(2304)

并聯冷凝式空氣源熱泵熱水系統研究··························江軼政，曾志勇，畢麟，劉益才(2310)

機車多邊形磨耗車輪鏇修異常原因分析及改進措施···任德祥，陶功權，劉歡，梁紅琴，陳國勝，溫澤峰(2317)

液電耦合式車輛可控 ISD 懸架性能分析與試驗研究··········楊曉峰，趙文濤，劉雁玲，沈鈺杰，顏龍(2327)

第10期

S0生物還原介導的鐵礦物厭氧還原過程研究···········夏旭，周雨行，夏金蘭，聶珍媛，王娜，楊洪英(2335)

礦渣-電爐還原渣全固廢膠凝材料的水化機理···········倪文，李穎，許成文，徐東，姜瑤琪，高廣軍(2342)

超細焦銻酸鈉的制備及粒度調控·························曹升，楊喜云，李計深，徐徽，石西昌(2352)

空氣霧化噴嘴霧化機理及影響因素實驗分析·······················蔣仲安，許峰，王亞朋，陳舉師(2360)

700 MPa級高強鋼氧化鐵皮高溫?zé)嶙冃涡袨椤ぁぁげ芄饷?，周忠祥，高欣宇，于聰，王皓，李志峰，劉振?2368)

多孔BCP支架及其仿ECM涂層對MG63細胞功能的影響·······································陳代遠，陳良建，鄭景璞，易曼菲，邵春生，張博(2376)

基于相控陣超聲導波掃描成像的大曲率油氣對焊彎管缺陷檢測···················羅更生，譚建平(2385)

橫向擺動對深海采礦揚礦管輸送特性的影響····························徐海良，饒星，楊放瓊(2395)

某型變轉速直升機傳動系統動力學特性分析·······鮑和云，李豐波，陸鳳霞，靳廣虎，朱如鵬，鄒小筑(2403)

局部剝落故障對滾動軸承接觸與振動特性的影響····劉靜，唐昌柯，師志峰，王林峰，徐子旦，邵毅敏(2417)

傾斜軸頸滑動軸承混合熱彈流研究························王家序，倪小康，韓彥峰，向果，肖科(2425)

新型自協作移動機器人及其力學協調分配方法···························張程煜，郭盛，趙福群(2435)

基于SHEPWM階段控制的航空電磁發射波形研究····················于生寶，高麗輝，陳楠，黃勇(2446)

固定翼線圈姿態變化對動態和靜態響應的影響與校正············朱凱光，王昊，彭聰，張瓊，范天姣(2455)

流-固-化耦合條件下硬脆性泥頁巖井壁漸進破壞效應探討······························肖志強，賈善坡，亓憲寅，戴永浩，呂方，賈陸鋒，溫曹軒(2464)

循環荷載下無砟軌道-橋梁結構體系剛度退化性能·························李龍祥，張燕，趙磊(2481)

螺栓超欠擰對鋼桁梁橋節點拼接接頭受力的影響···················高強，黃天立，陳龍，馮錫良(2491)

考慮結構表層粗糙度的混凝土樁-黏土界面剪切特性試驗研究·····汪優，李奕金，譚偉，湯明明，杜煒(2502)

干濕循環作用對水泥改良泥質板巖土路基動力響應影響的模型試驗··········朱自強，劉雨，陳俊樺(2510)

黏彈性結構精細化頻域動力分析方法··························蓋盼盼，徐趙東，呂令毅，戴軍(2520)

梅山鐵礦爆破粉塵潤濕性能關鍵影響因素···········王嘉瑩，金龍哲，郭敬中，劉建國，王天暘，鞏琦(2527)

孔隙介質水泥漿液滲透注漿有效擴散距離試驗研究·····張玉，郭豪，陳鐵林，王榮鑫，程少振，廖曉東(2536)

超高填方荷載下剛?cè)峤M合樁復合地基的加固機理及其優化設計··········································豆紅強，俞仰航，聶文峰，王浩，陳雷，張蕊(2552)

單元式無砟軌道板間傳力桿設置的計算方法·······················韋有信，楊斌，姜景山，趙振航(2563)

H型垂直軸風力機變槳機理研究進展························張立軍，馬東辰，胡闊亮，米玉霞，朱懷寶，顧嘉偉，劉靜，嚴強(2572)

用于CNG冷能回收的低溫有機朗肯循環系統熱力學分析·············李鋮灝，曾志勇，陳星宇，李潔(2586)

兩級壓縮雙溫空調系統的節能潛力························余磊，任承欽，楊洋，萬楊大，王招(2595)

140 km/h高速地鐵隧道凈空斷面面積研究·····························冉騰飛，梁習鋒，熊小慧(2603)

軸向載荷下蜂窩填充薄壁錐管的吸能特性·························李本懷，魯寨軍，朱慧芬，許平(2613)

第11期

天然磁黃鐵礦機械活化強化除砷技術·········張滎斐，劉屾淼，曹學鋒，韓海生，孫偉，成朋飛，王麗(2623)

固體氧化物燃料電池?cái)?shù)值仿真模型的建立···························湯水，張茂貴，賈明，劉宇(2633)

銅和鋅離子對水熱臭蔥石沉砷過程的影響·····························張鵬，李存兄，魏昶，楚銘，張俊，鄧志敢，李旻廷，李興彬(2645)

不同碳源作用下厭氧氨氧化耦合多菌系統脫氮效能·····················呂振，錢玉蘭，李燕，李亮(2656)

5083P-O和6008-T6鋁合金的應變率效應對緩沖器緩沖特性的影響·········································陳書劍，肖守訥，朱濤，繆得祥，楊冰，陽光武(2665)

新型超高強度Ti-20Zr-6.5Al-4V合金熱變形行為及熱加工圖·························聶中奎，楊秋月，張文瑋，張雪，楊洪艷，張喜，譚元標，劉文昌(2676)

帶缺陷的蜂窩鋁道面板平壓疲勞特性試驗研究····················陳東方，王潤唐，許巍，蔡良才(2687)

5052鋁合金熱拉伸流變應力及實心凸起板鍛造成形研究····林啟權，王曉偉，董文正，李彥濤，王志剛(2695)

單參數調整的欠驅動吊車防擺定位全過程自抗擾控制·················肖友剛，盧浩，余驛，韓錕(2703)

端盤截齒切削海底塊狀硫化物載荷特性···································李艷，陸鵬，李鈺晴(2712)

應用中國典型道路的道路耐久性試驗研究···········龍巖，蔣凌山，熊海林，劉雪強，陳志勇，余智明(2722)

某轎車車門輕量化與疲勞壽命多目標綜合優化·······龍巖，蔣凌山，劉雪強，熊海林，陳志勇，鐘慧卿(2732)

基于數據挖掘的寬厚板板凸度控制·················曹建國，江軍，趙秋芳，何安瑞，李存福，孫旭東(2743)

并聯踝康復機器人的系統搭建與運動控制策略·······李劍鋒，張子康，張雷雨，董明杰，左世平，張凱(2753)

基于EEMD多尺度樣本熵的S700K轉轍機故障診斷·····························魏文軍，劉新發(2763)

侵入接觸型隧道突泥涌水危險性評估的變權-靶心貼近度模型········································李朝陽，王迎超，劉洋，焦慶磊，王密田，張野(2773)

考慮填料與土地基差異性的填方邊坡穩定性上限分析········段君義，楊果林，林宇亮，邱明明，申權(2783)

考慮中間主應力的粉砂巖側向卸荷力學特性試驗研究····················馬鈺沛，李江騰，劉雙飛(2792)

基于球面對稱設計的離散元細觀參數定量確定方法···················彭霞，饒秋華，李卓，張杰(2801)

地鐵DTⅥ2扣件彈條力學特性及斷裂研究·················陳憲麥，屈鄭嘉，陳文韜，管吉波，李岳濤(2813)

基坑降水效應的室內試驗研究·································汪旭瑋，楊天亮，許燁霜，袁垚(2823)

水力采集過程中單球形顆粒起動試驗研究···························陳宇翔，熊宏，程輝，陳洋(2831)

干濕循環下受彎鋼筋混凝土梁的氯鹽侵蝕····················蔡健，李名鎧，陳慶軍，賴駿，魏沐楊(2840)

粗骨料高質量分?jǐn)?shù)充填料漿管輸水力坡度模型及其應用···············楊曉炳，吳凡，楊志強，高謙(2851)

多層土地基擴底抗拔樁離散元顆粒流研究···························李飛，楊俊杰，宋琦，孫濤(2859)

隧道近距下穿管線的爆破振動特征及安全標準···························管曉明，張良，王利民，傅洪賢，余道明，陳剛，丁一，姜萬里(2870)

不同變質程度煤在氧化過程中的表面官能團紅外光譜定量分析··········································譚波，徐斌，胡明明，楊現兵，陳坤亮，徐丞(2886)

SAGD循環預熱注汽參數影響規律數值模擬·····李朋，張艷玉，孫曉飛，劉洋，謝孟珂，王朝，陳會娟(2896)

基于改進粒子群算法的機車二系彈簧載荷分配優化·················韓錕，楊廣為，黃澤帆，鮑天哲(2906)

考慮翻箱作業的鐵路集裝箱中心站起重機調度··························郭鵬，何迅，許素瑕(2915)

第12期

響應曲面法優化石英脈型金礦尼爾森重選工藝…………………陳橋，陳貴民，佟琳琳，林意人，楊洪英(2925)

合成條件對電解錳渣制備沸石過程中沸石種類和性能的影響………………………………………………………………李昌新，喻源，張慶武，汪洋，鐘宏，王帥(2932)

粉末活性炭對偶氮染料的吸附特性及作用機制…………………………………………張婷婷，楊艷玲，李星，姜伊凡，王男，冀思揚，周志偉(2938)

微量Mn對Al-Zn-Mg-Zr合金板材組織與斷裂韌性的影響……………………………………………陳景超，柴文茹，汪慶，楊臻珅，劉勝膽，葉凌英，唐建國(2948)

Co質量分?jǐn)?shù)對FeCuCo預合金粉燒結與力學性能的影響………………………………劉志環，張紹和(2958)

料筒溫度對超聲塑化微制件充填質量的影響…………蔣炳炎，張英平，齊鵬程，鄒洋，魏國猛，吳旺青(2969)

基礎振動下電磁換向閥設計方法…………………………………………羅永康，張懷亮，劉瑞春，李衛(2978)

輪式磁吸附超聲檢測爬壁機器人的設計與吸附穩定性分析……………………李杰超，曹力科，肖曉暉(2989)

基于媒介齒條的漸開線圓柱蝸桿斜齒輪傳動嚙合特性分析…………………陳燕，殷國富，衡良，王玲(2998)

防滑控制參數對高速車輛車輪磨耗的影響……………………………江英杰，張合吉，陶功權，溫澤峰(3007)

傾斜巖面樁樁端豎向承載力計算方法……………………………孫義舟，童建富，齊添，孫宏磊，蔡袁強(3015)

基于傳遞熵和改進替代數據法的損傷識別……………………葉昌鵬，劉國華，何先龍，謝中凱，王振宇(3023)

單軸壓縮條件下平行雙裂隙演化機理的顆粒流分析……………李勇，蔡衛兵，朱維申，董振興，張強勇(3035)

分級循環荷載下泥巖和砂巖的阻尼特性試驗研究…………………………王軻，潘旦光，魯文艷，陳釩(3046)

基于反應譜分析的高層結構伸臂桁架最優位置研究………………………………………周穎，邢麗麗(3055)

持載下預應力CTRC板加固RC梁的抗彎性能……………………………………杜運興，邵喜誠，周芬(3066)

土壤含鹽量對電勢作用下黃土水分遷移影響試驗研究……………焦丹，任芮花，王鐵行，宋彥琳，張磊(3075)

基于砂巖凍融敏感性的遺跡劣化預測………………………………………廖茹雪，諶文武，王南，劉偉(3084)

Q460高強鋼材及T形對接接頭力學性能研究…………………………………邢佶慧，陳前，王濤，楊娜(3097)

巖芯直徑變形分析法及其在松科2井深部地應力調查中的應用………………………………………………………………楊躍輝，孫東生，鄭秀華，林為人，李阿偉(3106)

采空區群蠕變突變?nèi)S力學模型構建及穩定性精確預測……………任紅崗，汪旭光，譚卓英，夏志遠(3114)

裝配式核心鋼管混凝土柱軸壓性能及受力機理……………………劉陽，王超，郭子雄，王品治，許一鵬(3127)

基于最優扭矩控制策略的混合動力燃?xì)鉄岜媒?jīng)濟性分析……………………………陳濤，蔡亮，楊亞南(3137)

基于改進粒子群算法的海上風電匯集方式與并網優化研究……………牛東曉，趙東來，楊尚東，雷霄(3146)

假縫設置間距對道床板裂縫性能的影響…………………………………韋有信，楊斌，趙振航，趙延喜(3156)

縱向通風對地鐵區間隧道火災溫度特性影響…………………………易欣，范晶，馬礪，楊元博，張鵬宇(3163)

2019年第50卷卷終

Journal of Central South University(Science and Technology)General Contents(2019)

No.1

Numerical studies of performance of various liquid-solid momentum exchange coefficient models for fluidization behavior of particles··········································SUN Mingyang,YU Chuanbing,Lü Dong,WEI Lubin(1)

Experimental study on purification of low grade magnesite by triboelectrostatic beneficiation······································ZHAO Xiaolu,WANG Haifeng,LI Yao,YANG Jinshang,PENG Zhen(9)

Research of phase transformation of potassium in roasting process of vanadium extraction from shale··························································YANG Xinlong,FENG Yali,LI Haoran(15)

Characteristics of Hg0oxidation by K2S2O8based on limestone-gypsum desulfurization slurry·················································TIAN Lijiang,LIU Bingkun,LI Jie,SHEN Xiaoling(23)

Research on powder-solid interface and coupling deformation of Ti6Al4V alloy powder during high temperature and high pressure····························JI Chenhao,LANG Lihui,HUANG Xina,MENG Fandi,XU Wencai(29)

Preparation and characterization of silver/rare earth elements/carbon microspheres antibacterial agents···············BAO Ruiyu,YU Yanmin,ZHANG Qinqin,WANG Xingxin,CHEN Huiying,XIA Jianxin,LI Hua(38)

Positioning algorithm of drill rod for full computer-controlled rock-drilling jumbo based on pose error compensation·····································XIA Yimin,LI Zhengguang,LUO Jianli,ZENG Guiying,MA Jiesong(44)

Coupled synchronization capability of motor internal leakage of hydraulic vibratory hammer system without synchronous gear············································LUO Chunlei,TANG Zhiqing,MO Xin,CHEN Zhenying(52)

Ambulance stretcher based on parallel mechanism and vibration semi-active control··············································GAO Xiang,NIU Junchuan,SHEN Guodong,TIAN Lili(59)

Design and analysis of high performance machine tool based on redundant parallel mechanism····················································ZHAO Fuqun,GUO Sheng,XU Zichun,LI Dian(67)

Reserve prediction of bank outlets based on prophet framework·············LI Liping,DUAN Guihua,WANG Jianxin(75)

Research on mixed lubrication characteristics of strip mill based on surface roughness features of rolling interface····································WANG Qiaoyi,ZHU Yuan,GUO Shan,ZHANG Qiubo,CHI Bingbing(83)

H∞sampled-data control of networked traction control system and its application··········································CHEN Gang,WANG Xin,LUO Changsheng,XIAO Shenping(91)

Experimental study of post-tensioned prestressed simply-supported beam after anchorage failure······················································ZHOU Lingyu,XUE Xianxin,YIN Guowei(100)

Trapdoor model tests on loosening earth pressure and failure mode of loosening zone in sand·································CHEN Qizhi,GUO Shenggen,XU Changjie,LIANG Luju,LIU Xingwang(108)

Development of combined retaining structure composed of anti-slide pile and reinforced earth retaining wall····················································CAO Wenzhao,ZHENG Junjie,XUE Pengpeng(118)

Dynamic mechanical property analysis of roller-compacted concrete and damage constitutive model establishment············································ZHANG Sherong,SONG Ran,WANG Chao,WEI Peiyong(130)

Static mechanical properties of argillaceous slate coarse-grained soil improved by cement···························································LIU Yu,CHEN Junhua,ZHU Ziqiang(139)

Antiknock design of H-section steel column subjected to synergistic effects of blast and prefabricated fragments····································································TIAN Li,ZHANG Hao(146)

Upper bound solution for ultimate bearing capacity of suction caisson foundation based on Prandtl failure mode········································ZHU Wenbo,DAI Guoliang,GONG Weiming,ZHAO Xueliang(158)

Mechanics model of rake torque based on sludge height and its mechanism analysis························YANG Ying,WU Aixiang,WANG Hongjiang,ZHONG Changyun,CHENG haiyong(165)

Analysis of law of movement of coarse aggregate particles in pipeline transportation of paste··································YAN Bingheng,LI Cuiping,WU Aixiang,WANG Hongjiang,HOU Hezi(172)

Ultimate load capacity of FRP-strengthened RC beams considering different failure modes and secondary loading effects·······························································FANG Shengen,WU Bangbang(180)

Reliability of bonding between recycled concrete and steel rebar········································YANG Haifeng,CHEN Wei,ZHANG Tianbao,JIANG Jiasheng(189)

Influence of foundation excavation pit on adjacent metro tunnel using fluid-solid mechanics theory·····················HUANG Kan,YANG Weijun,MA Qi’ang,AN Yonglin,LI Yi,ZHOU Jingwei,QIU Lang(198)

Effect of acid rain infiltration on shear strength of expansive soil and its microscopic test········································CHANG Jin,YANG Heping,XIAO Jie,MAO Rui,TONG Chao(206)

Comparison of combustible limits of H2/air flames in square and circular micro tubes·········FAN Aiwu,YUAN Zili(214)

Study on optimal adjustment method of second pipe network in central heating system based on dynamic hydraulic balance·······································ZHOU Xuan,LIU Guoqiang,WANG Xiaopei,YAN Junwei(220)

Experimental study on dynamic performance of composite sleeper ballasted track····················ZHAO Zhenhang,SHEN Yuting,WEI Qiang,JIANG Wanhong,GENG Hao,LI Chenghui(234)

Cascaded method for running state estimation of four-wheel independent drive electric vehicles·····································CHEN Te,CHEN Long,CAI Yingfeng,XU Xing,JIANG Haobing(241)

No.2

Study on collisions of steel balls in grinding mill at different rotation speeds·········LI Tengfei,LIN Shuyong,ZHANG Bo,ZHANG Jiaming,JIAO Fen,QIN Wenqing,ZHANG Yansheng(251)

Characterization analysis of goethite residue from zinc hydrometallurgy plants····LI Yuhu,GAO Lupeng,LIU Zhihong(257)

Degradation of azo dye and electricity production by dual-anode microbial fuel cell system···································WANG Lian,CAO Xian,FENG Yuzhong,ZHANG Yi,LI Xianning(264)

Investigation on hydroforming technology and process of fiber reinforced metal laminate parts································LIU Shichen,LANG Lihui,GUAN Shiwei,SHENG Sijia,ZENG Yipan(272)

Effects of precursors and elicitors on production of ethyl vincamine by endophytic fungus CH1······································REN Na,LIU Jiajia,YANG Dongliang,XU Shijie,LUAN Mingbao,ZHAO Nana,PENG Yinzi,WU Yiqiang,YUAN Guangming(279)

Effect of tooth surface zoning modification by duplex helical method on reducing sensitivity of installation error·······················································YAN Hongzhi,WU Shunxing,XIAO Meng(286)

Chaos prediction and abnormality diagnosis of running state of AC electrical dynamometer············································ZHONG Dingqing,WANG Ailun,HE Qian,WEI Kexiang(295)

Pressure loss of conveying pipeline of natural gas hydrate·············XU Hailiang,HU Wengang,YANG Fangqiong(304)

Numerical simulation of dynamic characteristics and parameter optimization of flip-flow screen surface···················WU Jida,LIU Chusheng,WANG Zhenqian,JIANG Haishen,ZOU Mengqi,QIU Wenqiang(311)

Simulation analysis of free falling posture of gravity sampling device using OpenFOAM···············································MA Zhe,KONG Danya,WANG Yin,ZHAI Gangjun(321)

Fretting wear characteristics of TC4 alloy in distilled water··········SONG Wei,SUN Lu,JING Pengfei,YU Shurong(328)

A single moving observer ambiguity resolution locating algorithm using single baseline interferometer················································GUO Limin,XIE Qiang,CHEN Tao,WANG Mengxin(336)

Application of improved intelligent algorithm based on particle swarm in load identification···············································XIE Bing,XIE Boqun,ZHANG Meng,QU Xianqiang(343)

Dynamic mechanical characteristics and failure modes of sandstone with artificial surface cracks·············································WU Hao,ZHAO Guoyan,LIANG Weizhang,WANG Enjie(350)

Experimental study on antenna spacing of ground penetrating radar detection of grouting material behind shield segment···························HU Shengbin,XU Guoyuan,MA Fuan,TANG Fu,RONG Jipan,ZHONG Youxin(360)

Chaotic characteristics of self-heating of sulfide ore heap·························WU Zhiwei,PAN Wei,WU Chao,LI Zijun,LI Ming,LIU Zhengzhou,FENG Yanxi(368)

Multi-objective optimization and multi-attribute decision making on structural parameters of stage backfilling stope····························································LAN Ming,LIU Zhixiang,LI Xibing(375)

Model test and theoretical analysis of anti clogging capacity of siphon drainage···············································WANG Lei,SHANG Yuequan,Lü Junjun,XU Haodi(384)

Numerical analysis of influence of pile foundation construction on adjacent metro tunnel·····DING Zhi,ZHANG Xiao(390)

Construction monitoring and dynamic design of siltstone cutting high slope·················································WANG Yimin,WANG Zhaoyang,LI Qi,TAO Ziyu(400)

Parameter study on dynamic response of concrete filled square tube under lateral impact················································CAI Jian,YU Yu,CHEN Qingjun,LI Yunan,YE Jiabin(409)

Dynamic damage model of rock under impact loads of compression and tension·······················································XIE Fujun,ZHANG Jiasheng,CHEN Junhua(420)

An analytic model for axial load capacity and deformation capacity of short columns of circular UHPC filled steel tube··········································WANG Zhen,WANG Jingquan,LIU Tongxu,XIU Hongliang(428)

Numerical model building for broken ore body and optimization of stope structural parameters··································LIU Dong,SHAO Anlin,JIN Changyu,DING Chenggong,FAN Fuquan(437)

Analysis of factors affecting dynamic modulus of elasticity of saturated silty clay and research on backbone curve model····························································ZHUANG Yan,ZHU Wei,ZHANG Fei(445)

Variation law of rainfall infiltration depth and saturation zone of soil slope···································LIU Jie,ZENG Ling,FU Hongyuan,SHI Zhenning,ZHANG Yongjie(452)

Stress and stiffness characteristics of asphalt mixture under uniaxial tensile stress state·····························HUANG Tuo,QI Shuai,JIANG Haohao,HUANG Mouying,LI Mi,LI Yipeng(460)

Performance analysis of organic Rankine cycle power generation system with sinter cooling gas waste heat··············································FENG Junsheng,PEI Gang,DONG Hui,ZHANG Sheng(466)

Evolution of wake characteristics behind circular cylinder with an elastic splitter plate at low Reynolds number····························································HUANGFU Yucheng,SUN Zhiqiang(474)

Spray characteristics of non-normal fuel in-cylinder under condition of super-high pressure injection·······························LIU Qi,LIU Yunsheng,CHEN Xinzhuan,HUO Baiqi,OUYANG Guangyao(480)

Failure behavior and collision characteristics of energy-absorbing structures considering material failure criteria························FENG Yue,XIAO Shoune,ZHU Tao,YANG Bing,YANG Guangwu,CHE Quanwei(487)

No.3

Mineralogical characteristics of direct reduction titanium slag at Panzhihua·············································· WANG Yijie,XUE Yazhou,PAN Mao,WEN Shuming(497)

Reduction enhancement mechanisms of low iron grade ore-coal composite pellets by sodium salt·······································ZHONG Ronghai,HUANG Zhucheng,YI Lingyun,HAN Hetong(506)

Effect of Al2O3on metallurgical properties of blast furnace slags of vanadium-titanium magnetite and viscosity prediction model····························LIANG Haili,FENG Cong,CHU Mansheng,TANG Jue,WANG Wanping(514)

In-situ synthesis of Li4Ti5O12/S composite cathode by hydrolysis-melting diffusion method for all solid state lithium battery···································································DU Ying,LI Jie,LIU Jin(521)

Influence of plane grinding temperature threshold on formation of residual stress·························································WEN Jun,TANG Jinyuan,ZHENG Jinchao(530)

Disc cutter cutting mechanism under different combined dynamic and static loading conditions·······················································ZHANG Guiju,TAN Qing,LAO Tongbing(540)

Analysis of high-speed EMU gearbox sealing system based on multiphase flow theory·························································ZHANG Yu,ZHANG Kailin,YAO Yuan(550)

Dynamic characteristic of hydraulic leveling mechanism with a hybrid kinematic chain······················································KANG Huimei,ZHU Jianxin,WANG Shilin(557)

Attitude control of tandem rotor UAV based on cascade linear active disturbance rejection control·························ZHANG Yong,CHEN Zengqiang,ZHANG Xinghui,SUN Qinglin,SUN Mingwei(564)

A fault tolerant control method for quadrotor based on inner and outer loops················ZHENG Jiajing,LI Ping(572)

Target-centralization algorithm used for image preprocessing of CNN·················································DONG Qiucheng,WU Aiguo,DONG Na,FENG Wei(579)

Cloud model construction of virtual data agent and data placement···················HU Zhigang,ZHANG Xinxin,ZHENG Meiguang,CHANG Chenglong,LI Jia,YANG Liu(587)“Sweet spots zone” optimization of marine shale gas in complex geological conditions area out of Sichuan basin:a case of Paleozoic in Northwestern Hunan,China·········QIN Mingyang,GUO Jianhua,HUANG Yanran,JIAO Peng,LIU Chensheng,ZHENG Zhenhua,ZHANG Liangping,GUO Jun,CAO Zheng(596)

Evaluation and exploration suggestion of source rocks from Middle Jurassic to Lower Cretaceous in eastern Papuan Basin························LIU Xiang,GUO Jianhua,LIU Chensheng,KUANG Lixiong,LI Jie,ZHANG Zhen(607)

Displacement prediction model of landslide based on time series and GWO-ELM········································LIAO Kang,WU Yiping,LI Linwei,MIAO Fasheng,XUE Yang(619)

Influence of friction effect of sliding bearing on track-bridge interaction between continuous welded rail and long-span bridge in high-speed railway···································LIU Wenshuo,DAI Gonglian,QIN Hongxi(627)

New method of excavation base seepage stability calculation due to dynamic varying groundwater level·············································ZHANG Lisha,YING Hongwei,WANG Di,XIE Kanghe(634)

Experimental study on failure properties of frozen clay under dynamic loading·································LI Xiaolin,WANG Hongjian,ZOU Shaojun,JIANG Cong,NIU Yonghong(641)

Failure mode of deep underground cavity and upper bound solution of surrounding rock pressure·····················································ZHANG Daobing,MA Zongyu,LIU Zhizhen(649)

A prediction model on thermal boundary condition of embankment based on boundary layer theory············································LUO Xiaoxiao,YU Qihao,MA Qinguo,ZHANG Jianming(658)

Theoretical study of break down pressures and fracture initiation angles based on model containing wellbore and perforations···························FAN Yong,ZHAO Yanlin,ZHU Zheming,ZHOU Changlin,ZHANG Xianshang(669)

Experimental research on static mechanical properties of cement-improved argillite-slate coarse-grained soil under drying-wetting cycles···········································LIU Yu,ZHU Ziqiang,CHEN Junhua(679)

Damage model based on fracture cracking criteria······················MA Qiufeng,TIAN Jing,ZHOU Tianbai(687)

Study and application of grouting governing of completely weathered granite in water-rich stratum····QI Yanhai,LI Shucai,LI Zhaofeng,ZHANG Qingsong,YANG Lei,ZHANG Jian,LIN Rongfeng,WANG Kai(694)

3D nonlinear creep analysis method for concrete structures··············LI Shiwei,YANG Yongqing,CHEN Yuanjiu(704)

Experimental study on relationship among matric suction and moisture content and gradation of unsaturated coarse grained soil························HE Zhongming,LIU Yaxin,ZENG Xinfa,LIU Dengsheng,ZHI Menglin(712)

Measurement of pressure fluctuation characteristics during hydraulic lifting of spherical particles in vertical pipe····································································GUAN Hairong,SUN Zhiqiang(719)

Performance analysis for quantum thermoacoustic refrigeration micro-cycle working in generalized 1D potential········································································E Qing,WU Feng(726)

Comparative experiment study on combustion and emissions characteristics of gasoline blended with alcohols··········································LI Yu,GONG Jinke,YUAN Wenhua,FU Jun,LI Guangming(734)

Viscoelastic performance of CA mortar in prefabricated slab track·······························REN Juanjuan,LI Haolan,DU Wei,DENG Shijie,TIAN Genyuan,WU Jiang(743)

No.4

Dynamic analysis of SiC pellets drying based on apparent warp activation energy···········································LI Jian,FU Xiaoheng,LI Jun,ZHANG Yujing,SHI Yingjie(753)

Adsorption mechanism of octyl hydroxamic acid on bastnaesite surface··················WANG Jieliang,CAO Zhao,WANG Jianying,ZHANG Xuefeng,LEI Xiao,FENG Hongjie(762)

Visualization of liquid mixing process in top submerged blow stirred························ZHANG Han,ZAHNG Xiaohui,DENG Weipeng,ZHANG Guangjun,YAN Hongjie(771)

Analysis on photoreduction of Cr(Ⅵ)by visible-light-activated bismuth ferrite···········LI Wei,ZHANG Yongli,GUO Hongguang,LIU Yang,CHENG Xin,TANG Weihong,ZHAO Pingju(780)

Arsenic removal and regeneration of magnetic adsorbent prepared from backwashing iron sludge······································ZENG Huiping,YIN Can,SHENG Jiabao,LI Dong,ZHANG Jie(787)

Properties of Fe based pre-alloyed powder substitute Co application in diamond wire saw··································································LIU Zhihuan,ZHANG Shaohe(796)

Effect of annealing temperature on texture and anisotropy of mechanical properties of pure titanium(TA1)sheet······················ZHANG Guihua,JIANG Haitao,WU Bo,YANG Yonggang,TIAN Shiwei,GUO Wenqi(806)

Microstructural characteristics and mechanical properties of friction stir welded cupronickel alloy···························ZHOU Li,MIN Jie,LEI Shugui,HE Wenxiong,HUANG Yongxian,FENG Jicai(814)

Coupling reaction at Au-Sn heterogenous interface joints and its effects on mechanical property······························ZHU Xuewei,WEI Xiaofeng,HUANG Yuxiang,WEI Qizhe,CHENG Xiaoli(821)

Study on unsteady fluid radial force in deep-sea lifting pump·················ZHAO He,LIU Shaojun,HU Xiaozhou(829)

Law of system parameters and lifting performance in marine gas hydrate hydraulic lifting system·····················································XU Hailaing,HU Wengang,YANG Fangqiong(837)

Study on axial mechanical performances of wire rope strand considering inter-wire contact based on semi-analytical method···············ZHANG Manman,CHEN Yuanpei,MENG Fanming,GONG Xiansheng(845)

Experimental study on decoupling control for wheel-bridge simulated test bench of multiaxial vehicles····························································WANG Hui,ZHAO Guochao,JIN Xin(854)

Steering performance of tracked vehicle based on mechanical differential steering mechanism with twin driving····················································SHI Zhibiao,LIU Jiang,GAO Feng,ZENG Wen(864)

Quadrotor helicopter control based on LADRC &nonlinear mixed H2/H∞control structure·············································LIU Junjie,GAO Qiang,SUN Mingwei,CHEN Zengqiang(873)

Design of parameter self-turning fuzzy controller based on immune regulation mechanism·······························································LIU Bao,YE Huihui,CAI Mengdi(881)

Study on thermoplastic strain model of elastic knitted fabric in the heat setting process··············································ZHOU Lichun,LIU Shunjing,JIN Fujiang,CHU Beibei(892)

Optimal control of airborne electromagnetic wave form based on amplitude tracking method····································YU Shengbao,SONG Shuchao,XU Jianan,ZHANG Jialin,CHEN Xu(900)

Research on core induced polarization experimental system·····························JIA Jiang,KE Shizhen,ZHANG Bing,KANG Zhengming,LI Junjian,SUN Xu(908)

Characteristics of mesozoic and cenozoic volcanic rocks and its logging identification in Dawa Oil Field of Liaohe Basin·····················XIAO Mingguo,GUO Jianhua,JIAO Peng,GUO Xiangwei,WU Shiqing,TAN Hui(915)

Precast UHPC protection system for bridge pier against ship collision············ZHOU Lingyu,PU Xingxu,WEI Jun(923)

Research on settlement characteristics of embankment enclosed by reinforced soil and its control index·······················YANG Guolin,DUAN Junyi,HU Min,LUO Guangcai,QIU Mingming,LIN Yuliang(931)

Law of weakening mechanical properties of rare earth ore with leaching···········CHEN Xun,QI Yan,YIN Shenghua,LI Xiwen,XIE Fangfang,LIU Jiawei,CHEN Wei,YAN Rongfu(939)

Experimental study on advanced support effect in silty clay tunnel············LI Shucai,CHEN Hongbin,ZHANG Xiao,GONG Yingjie,LI Huiliang,DING Wantao,WANG Qi(946)

Three axis creep test and analysis of granite in underground laboratory of deep geological disposal···············································DING Yanzhi,ZHANG Qiangyong,ZHANG Longyun,REN Mingyang,YIN Xiangjie,WANG Bin,YU Guangyuan(957)

Effect of fissure on mechanical and damage evolution characteristics of sandstone containing hole defect··································ZHOU Junhua,YANG Kun,FANG Kai,ZHAO Tongbin,QIU Dongwei(968)

Deformation test of pre-disintegrating carbonaceous mudstone under loading and foundering condition······················CHEN Xiaowei,ZENG Ling,FU Hongyuan,LIU Jie,CHEN Shaozhuang,LIU Dashun(976)

Structure of continuously reinforced concrete pavement with double-layer reinforced and its application in urban road··················································LI Sheng,YANG Fan,LIU Meng,CHEN Shangwu(983)

Characteristics of flow around circular cylinder with slit at low Reynolds number······XING Pengfei,SUN Zhiqiang(990)

Optimizing model of topological structure for offshore wind farm absorption based on improved genetic algorithms··········································ZHAO Donglai,NIU Dongxiao,YANG Sangdong,LIANG Cai(998)

Analysis of application of reflective and thermal insulating coatings on double-line railway bridge CRTS II slab ballastless track····LIU Xueyi,YANG Jilong,JIANG Hengchang,KANG Weixin,YANG Rongshan,LI Zhenting(1005)

No.5

Influence of ultrafine comminution by high pressure grinding rolls on separation of vanadium titanium magnetite····································GUO Xiaofei,DAI Shujuan,ZHU Jujian,LI Lixia,WANG Hongbin(1013)

Analysis and calculation of steel scrap melting in multifunctional hot metal ladle·············································YANG Guang,DENG Shuai,XU Anjun,DAI Xiaoqing(1021)

Dust distribution rule and influencing factors in mobile grinding operation············································JIANG Zhongan,GAO Kangning,CHEN Jihe,LAN Gui(1028)

Transformation mechanism and leaching performance of rare earth fluoride molten salt slag in the process of Na2CO3-roasting····················································YANG Youming,LI Liu,XIAO Min,NIU Fei(1035)

Effect of homogenization on corrosion and fatigue performance of Al-4.46Mg alloy······················WANG Zailing,DENG Yunlai,WU Pengfei,SUN Lin,DAI Qingsong,YE Lingying(1042)

Effect of grain structure on stress corrosion resistance of Al-Zn-Mg alloy······························YE Lingying,YAO Xuebin,TANG Jianguo,LI Hongping,ZHANG Xinming(1049)

Effect of solution temperature on microstructure and properties of Ag-bearing 2205 duplex stainless steel·················································XIANG Hongliang,CHEN Shengtao,DENG Liping(1056)

Research progress of flexible and elastic bionic e-skin for robot······················QIU Lan,CAO Jianguo,ZHOU Jianhui,JIANG Jun,WANG Xiaolin,MIAO Cunxiao(1065)

Experimental research on in-mold hybrid molding of glass fiber reinforced polypropylene and nylon66············································FU Liang,JIANG Bingyan,WU Wangqing,MIN Liping(1075)

A new design method for compound modification of spur gear···················YANG Shuowen,TANG Jinyuan(1082)

Loss analysis and thermal control of power transformers with high power and high voltage················HUANG Yi,PENG Ke,WANG Wenchao,CHEN Lian,DONG Mi,SHAO Tian,LEI Jiahao(1089)

Fault current tracking method of motor simulator based on finite set model prediction·········································PENG Tao,LIU Bo,YANG Chao,QIN Rui,YANG Chunhua(1098)

Layered gel-casting process based on 3D printing technology·············LIU Enchen,GE Dongyuan,LUO Xinwu(1105)

Identically distributed multi-decision tree based on reinforcement learning and its application in imbalanced data sets··········································JIAO Jiangli,ZHANG Xueying,LI Fenglian,NIU Zhuang(1112)

Water inrush mechanism for slip instability of filled karst conduit in tunnels········································HUANG Zhen,LI Shijie,ZHAO Kui,WU Rui,ZHONG Wen(1119)

Experimental study of infrared radiation effects of rock with different loading rates···························································ZHOU Zilong,CHANG Yin,CAI Xin(1127)

Research on reverse rotation angle calculation method of vector form intrinsic finite element in plane···························WANG Shuangyan,LI Cong,YANG Yulong,PANG Zhicheng,TANG Hanqing(1135)

Mesoscopic numerical simulation for suffusion process of gap-graded sandy soil······································CAI Yuanqiang,ZHANG Zhixiang,CAO Zhigang,YAN Shuhao(1144)

Analysis of damage effects of a prestressed reinforced concrete hollow beam subjected to the synergistic effects of blast and fragments·····························································TIAN Li,LI Yongxin(1154)

Research on dynamic buckling propagation of pipeline with corrosion and ovality······················LI Muzhi,YU Jianxing,YU Yang,DUAN Jinghui,HAN Mengxue,LI Yang,YU Jiahui(1165)

Shear evolution and connected mechanism of pore structure in thickening bed of paste······························JIAO Huazhe,WANG Shufei,WU Aixiang,WANG Yiming,YANG Yixuan(1173)

Stability analysis and structural parameter optimization of pillar under impact of rockfall······································YU Qingjun,LI Yuanhui,LIU Zhaopeng,JI Xiaofei,PENG Kang(1181)

Experimental research on propagation mode of 3D hollow crack and material failure strength under hydro-mechanical coupling···································LI Bangxiang,ZHU Weishen,YANG Lei,YU Song,MEI Jie,

CAI Weibing,ZHANG Qiangyong,CHEN Yunjuan(1192)

Experimental study on crack resistance of reactive powder concrete beam-column joints·······································JU Yanzhong,SHEN Hao,WANG Dehong,ZHENG Wenzhong(1203)

Viscoelastic-plastic creep model of high stress argillaceous siltstone·······························LIU Xinxi,LI Shengnan,XU Zepei,LI Yu,GAO Xuewen,WANG Weiwei(1210)

Influence of seepage force on tunnel face stability by new Austria tunneling method··············HUANG Kan,AN Yonglin,YUE Jian,ZENG Xianchen,LI Jiahao,ZHANG Yijie,WANG Dong(1221)

Experimental research on nonlinear creep model of crumb rubber asphalt sand·································LIU Haoxuan,ZENG Guowei,BAI Fan,WU Liang,ZHENG Huasheng(1229)

Numerical simulation of material flow and heat transfer characteristics of cement rotary kiln··············································LIU Bin,ZHOU Wuzhou,ZHAO Pengcheng,LI Rui(1235)

Coupling effect of solidity and moment of inertia on performance of vertical axis wind turbine··············WANG Hanxiang,MA Wenlong,YU Hongdong,ZHANG Jinling,YAO Mingjian,ZHANG Lijun(1244)

Density functional theory analysis of acetic acid adsorption on CaCO3(104)surface···································CHAI Rukuan,LIU Yuetian,YANG Li,XIN Jing,XU Wanli,MA Jing(1252)

Band gap properties and noise reduction performances of periodic noise barriers in rail transit····································YI Qiang,WANG Yuhang,GAO Xin,ZHAO Caiyou,WANG Ping(1263)

No.6

Process mineralogy and grinding optimization of cassiterite polymetallic sulphide ore······················ZHOU Wentao,HAN Yuexin,LI Yanjun,SUN Yongsheng,YANG Jinlin,MA Shaojian(1271)

Reaction processes and kinetic study on preparation of nitrided ferrovanadium by V2O5··································WANG Bin,LI Dong,DU Jinjing,ZHU Jun,LIU Manbo,WANG Huan(1278)

Numberical simulation for metallurgical transfer in 70 t single snorkel RH···DOU Weixue,LEI Hong,ZHU Miaoyong(1284)

Efficiency and influential factors of grading coagulation process·······································DU Peng,LI Xing,YANG Yanling,SU Zhaoyang,FANG Xiaobo(1291)

Optimization design of pre-forming die based on intelligence algorithm·············WANG Menghan,YANG Yongchao,GUO Tao,WANG Zhoutian,ZHOU Wenwu,XIAO Guiqian(1298)

Preparation and high temperature tribological properties of cobalt-BaSO4self-lubricating composites·············································WANG Wenjie,CUI Gongjun,YANG Zhenwei,SHI Ruibo(1306)

Effects of textures on anisotropy of mechanical behaviors of cold-rolled and annealed Cu sheets under compressive loading·············WANG Renke,CHEN Zhiyong,SHAO Jianbo,XIAO Zhu,LIU Chuming,TANG Jianguo(1314)

Research on extraction of indium from methanesulfonic acid solution with P204·······················HE Jing,LI Yanggang,LIU Tao,LIAO Fangwen,CHEN Yongming,YANG Shenghai(1320)

Composition and formation mechanism of adhesive in blast furnace cooling stave······························MA Hengbao,ZHANG Jianliang,JIAO Kexin,ZHOU Yunhua,DAN Jiayun(1326)

Dynamics characteristics of multi-stage combined type large angle luffing mechanism·································ZHU Zhenxin,ZHU Jianxin,TANG Bohao,GU Linkun,QIAN Huanyun(1334)

An elastoplastic contact model for rough surface contact with continuous,monotonous and smooth stiffness···························································XIAO Huifang,SUN Yunyun,XU Jinwu(1343)

Tooth surface reconstructing method of spiral bevel gear generated by duplex helical method based on renewal Kriging model·········································DENG Chen,YAN Hongzhi,CHEN Yizhong,YI Weibin(1351)

Mechanical characteristics model of hydropneumatic suspension···································YU Ziliang,YANG Jue,MA Yuan,YIN Yuming,SUBHASH Rakheja(1357)

Effect of rolling parameters on grain size of hollow shaftwith variable cross section and equal diameter in cross wedge rolling···········································YU Xuan,PENG Wenfei,YU Chunjie,SHU Xuedao(1364)

Fault diagnosis of electronic throttle pedal based on probabilistic neural network··················································JIANG Yuxiu,ZHAO Xiaohuan,DENG Yuanwang(1370)

Automatic evaluation method of search snippet presentation performance··············ZHANG Hui,MA Shaoping(1378)

Applicability evaluation on application of thermosyphon in embankment engineering of expressway in permafrost regions of Qinghai-Tibet Plateau······························KONG Sen,WEN Zhi,WU Qingbai,WANG Dayan(1384)

Degradation behavior and mechanism of slate under alternating conditions of freeze-thaw and wet-dry·················································WU Guopeng,CHEN Wenwu,CUI Kai,WANG Pei(1392)

Blasting-induced fracture zone in rock mass considering integrity of rock mass·······················································XIE Fujun,ZHANG Jiasheng,CHEN Junhua(1403)

Study on statistical thermal damage constitutive model of rock based on normal distribution···················ZHU Zhennan,JIANG Guosheng,TIAN Hong,WU Wenbing,LIANG Rongzhu,DOU Bin(1411)

Properties and failure mechanism of layered sandstone based on acoustic emission experiments······················LIU Yunsi,WANG Shiming,YAN Shijun,FU Helin,CHEN Chen,SHI Yue,YUE Jian(1419)

Settling velocity variation of mud layer and particle settling characteristics in thickening of tailings············································HOU Hezi,LI Cuiping,WANG Shaoyong,YAN Bingheng(1428)

Seismic damage behavior of corroded reinforced concretemoment-resisting frames······················································LIU Xiaojuan,JIANG Huanjun,GUO Zixiong(1437)

Model test study on failure mode of segment structure of shield tunnel with crack length··························LIU Chuankun,HE Chuan,WANG Shimin,MA Gaoyu,GUO Wenqi,LU Daiyue(1447)

Experimental study on shear strength deterioration rules of fault fracture zone subjected to blasting vibration························································WU Tingyao,ZHOU Chuanbo,JIANG Nan(1457)

Numerical simulation on bearing behavior of glass fiber reinforcement polymer anti-floating anchor system in weathered rock foundation·······················BAI Xiaoyu,ZHANG Mingyi,KUANG Zheng,YAN Nan,JIA Keke(1466)

Research advances in numerical simulation of microbial enhanced oil recovery·····················WANG Tianyuan,XIU Jianlong,CUI Qingfeng,HUANG Lixin,MA Yuandong,YU Li(1474)

Numerical analysis and experiment of icing condition of bundled conductors·····································HE Qing,LI Junhui,ZHANG Jian,DENG Mengyan,DU Dongmei(1485)

Application of trial difference calculation method for bivariate in water cycle system···································································MENG Zhiqiang,ZHANG Pei(1492)

Optimal energy-efficient trajectory planning for middle-speed maglev considering constraint of auxiliary stopping area····················CHAI Xiaofeng,LIU Jun,LAI Qingying,MENG Lingyun,DING Wenliang,XU Yazhi(1499)

No.7

Effect of additives on bioleaching of copper sulfide ores······································CHEN Wei,YIN Shenghua,QI Yan,CHEN Xun,WANG Leiming(1507)

Adsorption mechanism of starch and sodium oleate on magnetite using QCM-D··········XIE Dongdong,HOU Ying,HUANG Guichen,TAO Dongping,HAN Cheng,WANG Xiaoli,JIN Da(1514)

Electrochemical synthesis of nickel isooctanoate·························YANG Shenghai,LI Weilun,WU Yanzeng,WANG Changhong,CHEN Yongming(1521)

Metal distribution behavior in copper dross smelting for enrichment···········XIAO Hui,XIE Boyi,CHEN Lin,WANG Zhixiong,LIU Weifeng,ZHANG Duchao,YANG Tianzu(1527)

Oxidation kinetics and interfacial bonding properties of Ni-Co based superalloys··························SONG Zhengqi,LI Zhiqiang,ZHENG Xudong,SHEN Mingming,ZOU Jianpeng(1537)

Mechanism for solidification of arsenic with blast furnace slag-steel slag based cementitious materials··········································YAN Qihui,NI Wen,GAO Wei,LI Yunyun,ZHANG Yuying(1544)

Critical blank holder force of deep drawing process for magnesium alloy cylindrical parts································YANG Liu,GUAN Yingping,YAO Dan,DUAN Yongchuan,GAO Anna(1551)

Dynamic engagement characteristics of sprag clutch with fluctuation of input speed······················YAN Hongzhi,TIAN Hao,ZHU Chu,LI Zhi,QIN Juan,LIU Jianrui,WANG Zhibiao(1558)

Working performance of deep-sea ore transporting equipment··········XU Hailiang,RAO Xing,YANG Fangqiong(1567)

Kinetic characteristics of high voltage circuit breakers based on spring stress relaxation······························LI Xiaofeng,WU Shijing,LI Xiaoyong,ZHAO Deng,LI Qiaoquan,LI Xing(1575)

High precision integrated profile and flatness control fornew-generation high-tech wide strip cold rolling mills······························CAO Jianguo,JIANG Jun,QIU Lan,LI Yanlin,HE Anrui,ZHANG Yongjun(1584)

Load sharing characteristics and experimental research of cylindrical gear split-torque transmission system·····································JIN Guanghu,LONG Shanshan,GAO Peng,PAN Lei,ZHU Rupeng(1592)

Fast coarse registration method of optical and SAR images based on visual saliency feature································································HUA Li,XU Chuan,SUI Haigang(1602)

Analysis of power model of multi-core microprocessor architecture····················································CHEN Zhuo,LIU Chang,HOU Shen,GUO Yang(1611)

Image stitching preprocessing method based onpseudo high dynamic range·······························WU Lianghong,SUN Liang,ZHOU Bowen,ZHANG Hongqiang,LU Ming(1619)

Control factors on the hydrocarbon accumulation of the Es4s reservoirs in Yanxie 229 area,Dongying Sag··································XIE Qiangwang,WANG Yanzhong,CAO Yingchang,WANG Shuping,LI Yuzhi,WANG Xin,LI Qiao,XI Kelai,MI Lianshan,GUO Yingchun(1626)

Research status of graphene material in fields of asphalt composites·············ZHANG Xia,HUANG Gang,ZHOU Chao,YUAN Xiaoya,HE Junxi,FENG Manman,LIU Zhao(1637)

Theoretical calculations of transverse force on shield tunnel caused by eccentric load·······························WEI Gang,HONG Wenqiang,WEI Xinjiang,LIN Xinbei,WANG Lizhong(1645)

Period-simulation of CRTS Ⅲ slab track based onMonte Carlo simulation and BIM ·····························WANG Weidong,LEI Xiaoming,DU Xianggang,WANG Jijun,HE Xiaogang(1655)

Influence of encasement length on deformation and stability of embankments on composite foundation reinforced with geosynthetic-encased stone columns·············CHEN Jianfeng,LI Liangyong,XU Chao,FENG Shouzhong(1662)

Effects of aggregate densification on unclassified tailings thickening performance···································ZHOU Xu,WANG Hongjiang,WU Aixiang,CAO Yansen,NIU Peng(1670)

Seepage calculation model and numerical analysis of rock fracture considering effect of contact area and clastic rock············PAN Dongdong,LI Shucai,XU Zhenhao,DU Yuchao,SHI Xuesong,GAO Bing,WANG Wenyang(1677)

Failure laws of asymmetrical double-arch tunnels under effects of voids behind vault······························MIN Bo,ZHANG Chengping,ZHANG Xu,GONG Yanping,YUAN Tengfei(1686)

Determination of regularization parameter in semiparametric model based on U curve method··············································ZHOU Yan,JIN Fengxiang,Liang Qinghua,MA Depeng(1696)

Effects of freezing methods on size distribution of ice crystals during pre-freezing mannitol··························································· JIA Yingjiao,LIU Zhiqiang,LUO Chun(1704)

Characteristics of frost spreading during initial stage of condensed droplet freezing on superhydrophobic surface····································································LUO Qianni,LIANG Caihua(1712)

A new Brayton cycle used for energy recovery of IC engine exhaust gas···································· ZHOU Feng,FU Jianqin,LIU Jingping,TANG Qijun,ZHU Guohui(1719)

Effects of jet temperature on high temperature gas jet controlled compression ignition·····················ZHU Pei,TIAN Hua,MENG Xiangyu,CUI Jingchen,TIAN Jiangping,LONG Wuqiang(1729)

Cooperative scheduling optimization model and simulation application for virtual power plant and efficiency power plant considering uncertainty and energy storage system······································ NIU Dongxiao,ZHAO Donglai,YANG Shangdong,LIU Longzhu(1736)

Test of automobile air resistance coefficient based on energy conservation method······························································· PING Peili,DU Weitao,HU Yumei(1744)

Damping effect of fundamental frequency of steel spring floating slab track based on magneto-rheological dampers with improved bang-bang control··············WEI Kai,NIU Pengbo,ZHAO Zeming,LI Huailong,DU Xianggang(1750)

No.8

Screening of PFOA-resisting bacteria and their physiological response to stress·····························YI Langbo,CHAI Liyuan,PENG Qingzhong,TANG Chongjian,ZHOU Lulu(1759)

An integration of new technologies for preparation of lithium antimonite and lithium hexafluoroantimonate······························LIU Weifeng,TANG Zanlang,CHEN Lin,ZHANG Duchao,YANG Tianzu(1768)

Oxidation separation of low-grade molybdenum with rhenium-bearing by two-stage roasting···············································DENG Qiong,FAN Xiaohui,GAN Min,CHEN Xuling(1778)

A new determination method for assimilation characteristic of iron ore based on dynamic resistance measurement······················QIAN Lixin,CHUN Tiejun,LONG Hongming,LI Ning,WANG Yifan,YU Zhengwei(1787)

Study ofChlorella vulgarisgrowth coupled with purification of livestock and poultry aquaculture wastewater·················································ZHU Zhongqiang,HE Xue,XUE Mengting,YU Ran(1795)

Preparation and bacteriostatic properties of flexible silicone hydrophobic coatings··················SHEN Qihui,SHAN Yixuan,LIAN Pengliang,LIU Yan,YU Dongdong,ZHOU Jianguang(1802)

Modified J-C constitutive model of H13 steel based on reverse fitting algorithm··························································· ZHANG Jing,ZHANG Song,LI Binxun(1808)

Compaction behaviors of hard spherical granules in cylinder subject to cyclic torsional shear············································OUYANG Hongwu,LEI Gang,TANG Xin,MENG Liping(1816)

Influence of blade shape and installation angels on cutting performance for scrapers of slurry shield·····························XIA Yimin,SHEN Feng,CHEN Songtao,CHEN Peng,SUN Xutao,NING Bo(1824)

Autonomous obstacle avoidance strategy for mobile robots in indoor dynamic environment·············································YANG Minghui,WU Yao,ZHANG Yong,XIAO Xiaohui(1833)

Simulation analysis of flow field and temperature field of oil-immersion lubrication gearbox······································BAO Heyun,FAN Yong,ZHU Rupeng,LU Fengxia,JIN Guanghu(1840)

Influence of shape of slotted airfoil on aerodynamic performance of vertical axis wind turbine······································ZHANG Lijun,MADongchen,GU Jiawei,JIANG Yijia,MI Yuxia,ZHAO Xinhui,WANG Hanxiang,LIU Yanxin,LIU Jing(1848)

Outage probability analysis of energy harvesting cognitive cooperative relay networks with direct link·······································LUO Yi,SHI Ronghua,DONG Jian,TANG Kun,WANG Yuting(1857)

Fatigue damage evolution of Timoshenko beams based on natural frequency···············WEI Jun,DU Yongxiao(1866)

Experimental study on a damage model of rock with center hole under high frequency impact·····························································WU Wanrong,YAO Zhuang,LIU Zhi(1876)

Layered slope stability analysis considering anisotropy·········· LUO Linghui,ZHOU Jian,CAI Lu,WEN Xiaogui(1883)

Micro-fracture evolution rule of sandstone specimens with a single hole under uniaxial compression··········································ZHAO Guoyan,WANG Enjie,WU Hao,QIU Ju,DAI Yiwen(1891)

Experimental investigation on shear performance of RC beams due to longitudinal reinforcement corrosion············································HUANG Tianli,ZHAO Zhiyan,SONG Li,WANG Ningbo(1901)

Parameter inversion of seismic waves in anisotropic media and its application in bad geological prediction of tunnels····································HE Xianqi,PENG Lingxing,LU Guangyin,ZHU Ziqiang,GAO Feng(1912)

Failure behaviors of cracked tunnel under impact from different loading orientations························ZHOU Lei,ZHU Zheming,FAN Yong,LIU Ruifeng,DENG Shuai,DONG Yuqing(1921)

Influence of water content on loess air permeability and its microcosmic mechanism·······································LIU Jinyang,LI Xi’an,GUO Zeze,LI Chengsheng,MA Chiyang(1930)

Constitutive model of rock compaction stage based on contact theory···········································MA Qiufeng,QIN Yueping,ZHOU Tianbai,YANG Xiaobin(1941)

Theoretical stability calculation of surrounding rocks in divergence of deep tunnel····························RAO Junying,XIE Caijin,ZHAO Xia,LIU Dengkai,NIE Chongxin,LIU Ning(1949)

Seismic behavior and design method of an innovative replaceable-on-site steel bridge pier·············································Lü Yingting,GUO Zixiong,LIU Yang,HUANG Qunxian(1960)

Evolution rule of acoustic characteristics of brittle rocks during whole stress-strain process······························ZHANG Guokai,LI Haibo,WANG Mingyang,DENG Shuxin,WANG Zhen(1971)

Stress-strain relationships of bioenzyme-treated expansive soil···········CHEN Yongqing,WEN Changping,FANG Xuanqiang,CHEN Zonghui,SUN Zheng,WANG Jiejun(1981)

Analysis on pullout behaviors of full-bonding glass fiber reinforced polymer anti-floating anchor·····························BAI Xiaoyu,ZHANG Mingyi,KUANG Zheng,WANG Yonghong,YAN Nan(1991)

System model identification of superheated steam temperature based on particle swarm optimization····················································WANG Huan,RAO Zhenghua,LIAO Shengming(2001)

Laser visualization on characteristics of GDI ultra-high pressure spray impingement··················XU Kai,WEI Lixia,PEI Yiqiang,WANG Chenxi,LI Xiang,LI Junqi,YE Ziwang,XU Bei(2009)

Experimental research on pyrolysis of Cd contaminated rape stalk··················CAI Pan,JIANG Shaojian,PENG Haoyi,ZHU Mingwei,WANG Kai,WANG Hao,LIU Xi(2018)

Relationship between freezing methods of solution and ice grain size distribution··················································JIAYingjiao,YU Yunxia,LIU Zhiqiang,LUO Chun(2026)

Influence of impeller with splitter blades on jet self-priming centrifugal pump·······························DONG Liang,PAN Qi,LIU Houlin,DAI Cui,XU Jianhong,XU Hailiang(2033)

Analysis of stress and deformation of slab ballastless track under effect of subgrade frost heaving—melting—settlement cycle ···················XIANG Jun,LIN Shicai,YU Cuiying,YUAN Cheng,CHEN Lin,YANG Haiming(2043)

No.9

Hydrothermal scorodite precipitation and conversion behavior of metastable iron phase from wastewater produced in copper smelting············ZHANG Jun,LI Cunxiong,WEI Chang,DENG Zhigan,LI Xingbin,ZHANG Peng(2053)

Effect of heating process on Nb-Ti microalloyed high strength steel··············································LIANG Wen,WU Run,HU Jun,DU Tao,YIN Yunyang(2063)

Digestion performance and microstructure evolution of desilicated concentrate from low-grade high sulfur bauxite·························WU Hongfei,XIA Feilong,LI Junqi,CHEN Chaoyi,XU Shutao,ZHANG Shiheng(2074)

Preparation and characterization of Al2O3dispersion-strengthened copper-tin alloyed powder by diffusion method·················································YAN Zhiqiao,CHEN Feng,LIU Yong,WANG Tao(2084)

Characterization of micro-channel replication inmicrofluidic chip and its application in injection molding················································MIN Liping,JIANG Bingyan,ZHU Laiyu,LI Xianglin(2091)

Virtual material based modelingfor contact stiffness characteristics of bolted joint interface··············································XIAO Huifang,SUN Yunyun,XU Jinwu,SHAO Yimin(2100)

Rotating stall characteristics of mixed flow pump under different flange clearances··································PING Yuanfeng,SHI Weidong,LI Wei,JI Leilei,LI Enda,MA Lingling(2109)

Dynamics analysis and simulation of a novel parallelperfusion robot······YANG Hui,FANG Hairong,FANG Yuefa(2118)

Workspace analysis and trajectory planning of drill arm of roboticized bolting truck········································HAO Xuedi,JING Xinping,ZHANG Zhongping,XIE Yonghou,ZHANG Jinglin,LIU Bing,LIANG Zenan,WU Miao(2128)

Experimental investigation on chip morphology and properties in thread hard whirlwind milling of bearing steel GCr15········································HE Yan,BAI Yunlong,LI Li,WANG Yulin,LI Yufeng,YI Lili(2138)

Fault diagnosis of S700K switch machine based on fuzzy cluster method··················LIU Xinfa,WEI Wenjun(2148)

Stability analysis for network system based on quantitative control············CHEN Gang,CHEN Yun,WANG Wei(2156)

Real-time object tracking combined RGB-D with MeanShift··WANG Guanglong,TIAN Jie,ZHU Wenjie,FANG Dan(2163)

Fine road network modeling based on ubiquitous location data·················DENG Min,SHE Tingting,HUANG Jincai,LIU Huimin,ZHANG Jianguo,ZHENG Xudong(2171)

Engenparameter analysis for frequency-domain inversion of marine CSEM data········HAN Bo,LI Gang,LIU Ying(2184)

Influence of pavement stiffness and subgrade heterogeneity on additional stresses of pavement and subgrade resulted from aircraft loads·································HUANG Bo,WANG Yu,ZHAO Yun,LING Daosheng(2195)

Effect of heat treatment on physical and mechanical properties of frozen sandstone························JIN Aibing,WU Changgui,ZHAO Yiqing,WANG Benxin,SUN Hao,ZHAO Anyu(2207)

Analytical method for influence analysis of foundation pit excavation on underlying metro tunnel·················LIU Jianwen,SHI Chenghua,LEI Mingfeng,PENG Limin,CAO Chengyong,LIN Yuexiang(2215)

Numerical simulation of bentonite swelling attenuation processes in long time scale·····························································LI Xiaoyue,JIANG Hao,XU Yongfu(2226)

Shear properties of interface between argillaceous slate sand and concrete························ZHOU Yi,PENG Zhenbin,YIN Quan,CHEN Leqiu,CHEN Juan,ZHANG Chuang(2233)

Compressive characteristics of vertical inner plate reinforced square hollow section tubular joints·································CHANG Hongfei,XU Wei,ZUO Wenkang,LIU Shuaipeng,XIA Junwu(2242)

Research on transverse seismic pounding effect and shear-keygaps of high-speed railway continuous beam bridges················································YANG Menggang,WANG Chuankun,QIAO Jiandong(2252)

Effect of mixed aggregate gradation on segregation offilling slurry··········································WEN Zhenjiang,GAO Qian,CHEN Dexin,WANG Yongding(2264)

Calculation of rotation and shearing dislocation deformation of underlying shield tunnels due to foundation pit excavation·····································································WEI Gang,ZHANG Xinhai(2273)

Uniaxial mechanical characteristics of anchored sandstone andits mechanism of controlling buckling rockburst····································WANG Bin,NING Yong,FENG Tao,WANG Weijun,GUO Zeyang(2285)

Collapse mechanism of tunnel portal sectionin broken flysch under influence of heavy rainfall···········································GAO Yang,SUN Haokai,LIU Dejun,XU fei,ZHANG Qian(2295)

Morphology of heavy metals in process of pyrolysis of rape stalk···························ZHU Mingwei,JIANG Shaojian,FU Guofu,CAI Pan,WANG Kai,WANG Hao(2304)

Research on parallel hot water system of ·····················JIANG Yizheng,ZENG Zhiyong,BI Lin,LIU Yicai(2310)

Analysis of abnormal turning repair for locomotive wheels with polygonal wear and improvement measures················REN Dexiang,TAO Gongquan,LIU Huan,LIANG Hongqin,CHEN Guosheng,WEN Zefeng(2317)

Performance analysis and experimental study of hydro-electric coupling vehicle controllable ISD suspension····························YANG Xiaofeng,ZHAO Wentao,LIU Yanling,SHEN Yujie,YAN Long(2327)

No.10

Study on S0bio-reduction mediated reduction of iron minerals························XIA Xu,ZHOU Yuhang,XIA Jinlan,NIE Zhenyuan,WANG Na,YANG Hongying(2335)

Hydration mechanism of blast furnace slag-reduction slag based solid waste cementing materials·······························NIWen,LI Ying,XU Chengwen,XU Dong,JIANG Yaoqi,GAO Guangjun(2342)

Preparation and particle size control of ultrafine sodium pyroantimonate··········································CAO Sheng,YANG Xiyun,LI Jishen,XU Hui,SHI Xichang(2352)

Experimental analysis of atomization mechanism and influencing factors of air atomizing nozzle·············································JIANG Zhongan,XU Feng,WANG Yapeng,CHEN Jushi(2360)

Hot deformation behavior of iron oxide of 700 MPa grade high strength steel at high temperature··········CAO Guangming,ZHOU Zhongxiang,GAO Xinyu,YU Cong,WANG Hao,LI Zhifeng,LIU Zhenyu(2368)

Effect of porous BCP scaffold and its bionic ECM coating on function of MG63 cells···············CHEN Daiyuan,CHEN Liangjian,ZHENG Jingpu,YI Manfei,SHAO Chunsheng,ZHANG Bo(2376)

Inspection of defects in large curvature butt-welded bends with viscoelastic anticorrosive coating based on phased array ultrasonic guided wave scanning ·······································LUO Gengsheng,TAN Jianping(2385)

Influence of lateral swing on transportation characteristics of deep sea mining pipeline························································XU Hailiang,RAO Xing,YANG Fangqiong(2395)

Analysis of dynamic characteristics of a variable speed helicopter transmission system·························BAO Heyun,LI Fengbo,LU Fengxia,JIN Guanghu,ZHU Rupeng,ZOU Xiaozhu(2403)

Influence of localized spalling defect in roller bearing on contact characteristics and vibrations·························LIU Jing,TANG Changke,SHI Zhifeng,WANG Linfeng,XU Zidan,SHAO Yimin(2417)

Mixed thermoelastohydrodynamic lubrication investigation of misaligned journal bearings······································WANG Jiaxu,NI Xiaokang,HAN Yanfeng,XIANG Guo,Xiao Ke(2425)

New self-cooperation mobile robot and force coordinated distribution method······················································ZHANG Chengyu,GUO Sheng,ZHAO Fuqun(2435)

Research on airborne electromagnetic emission waveform via SHEPWM subsection control···············································YU Shengbao,GAO Lihui,CHEN Nan,HUANG Yong(2446)

Influence and correction of coil attitude on dynamic and static responses for fixed-wing································ZHU Kaiguang,WANG Hao,PENG Cong,ZHANG Qiong,FAN Tianjiao(2455)

Hydraulic-mechanical-chemical coupling evaluation for progressive failure of hard brittle shale wellbore··············XIAO Zhiqiang,JIA Shanpo,QI Xianyin,DAI Yonghao,Lü Fang,JIA Lufeng,WEN Caoxuan(2464)

Performance of stiffness degradation of structure system in ballastless track-bridge under cyclic load·····ZHANG Yan(2481)

Influence of over-under-tightening of bolts onmechanical properties of connections of steel truss girder bridge············································GAO Qiang,HUANG Tianli,CHEN Long,FENG Xiliang(2491)

Experimental study on shear properties of concrete pile-clay interface considering surface roughness of structure··········································WANG You,LI Yijin,TANWei,TANG Mingming,DU Wei(2502)

Model tests of influences from drying-wetting cycle ondynamic responses of subgrade filled withcement-improved argillaceous-slate soil···········································ZHU Ziqiang,LIU Yu,CHEN Junhua(2510)

Fine dynamic analysis method for viscoelastic structures in frequency domain····················································GAI Panpan,XU Zhaodong,Lü Lingyi,DAI Jun(2520)

Key influencing factors on wettability of blasting dust in Meishan Iron Mine···················WANG Jiaying,JIN Longzhe,GUO Jingzhong,LIU Jianguo,WANG Tianyang,GONG Qi(2527)

Experimental study on effective diffusion distance ofcement slurry in porous media under permeation grouting················ZHANG Yu,GUO Hao,CHEN Tielin,WANG Rongxin,CHENG Shaozhen,LIAO Xiaodong(2536)

Reinforcement mechanism and optimization design of rigid-flexible piled composite foundation under ultrahigh fill load······················DOU Hongqiang,YU Yanghang,NIE Wenfeng,WANG Hao,CHEN Lei,ZHANG Rui(2552)

Calculation method of dowel bars setting betweenunit ballastless track plates··········································WEI Youxin,YANG Bin,JIANG Jingsha,ZHAO Zhenghang(2563)

Research advances in pitching mechanism of H-type vertical axis wind turbine······ZHANG Lijun,MA Dongchen,HU Kuoliang,MI Yuxia,ZHU Huaibao,GU Jiawei,LIU Jing,YAN Qiang(2572)

Thermodynamic analysis of low temperature organic Rankine cycle system applied for CNG cold energy recovery·················································LI Chenghao,ZENG Zhiyong,CHEN Xingyu,LI Jie(2586)

Energy saving potential of two-stage compressiondual-temperature air conditioning system·····································YU Lei,REN Chengqin,YANG Yang,WAN Yangda,WANG Zhao(2595)

Study on sectional area of high-speed subway tunnel withspeed of 140 km/h······················································RAN Tengfei,LIANG Xifeng,XIONG Xiaohui(2603)

Energy absorption characteristics of honeycomb-filled taper tube under axial loading····················································LI Benhuai,LU Zhaijun,ZHU Huifen,XU Ping(2613)

No.11

Arsenic removal technology based on mechanical activation of natural pyrrhotite·······ZHANG Xingfei,LIU Shenmiao,CAO Xuefeng,HAN Haisheng,SUN Wei,CHENG Pengfei,WANG Li(2623)

Establishment of numerical simulation model for solid oxide fuel cell····················································TANG Shui,ZHANG Maogui,JIA Ming,LIU Yu(2633)

Effects of zinc and copper ions on ferric arsenate precipitation in hydrothermal scorodite······ZHANG Peng,LI Cunxiong,WEI Chang,CHU Ming,ZHANG Jun,Deng Zhigan,LI Minting,LI Xingbin(2645)

Nitrogen removal performance of ANAMMOX coupled multi-bacteria system with different carbon sources···························································Lü Zhen,QIAN Yulan,LI Yan,LI Liang(2656)

Influence of 5083P-O and 6008-T6 aluminum alloys strain rate effect on cushioning characteristics of thin-walled circular metal tube buffer·····CHEN Shujian,XIAO Shoune,ZHU Tao,MIAO Dexiang,YANG Bing,YANG Guangwu(2665)

Hot deformation behavior and processing maps of new ultra-high strength Ti-20Zr-6.5Al-4V alloy········································NIE Zhongkui,YANG Qiuyue,ZHANG Wenwei,ZHANG Xue,YANG Hongyan,ZHANG Xi,TAN Yuanbiao,LIU Wenchang(2676)

Experimental study on plane compression fatigue characteristics of aluminum honeycomb panel with defects·············································CHEN Dongfang,WANG Runtang,XUWei,CAI Liangcai(2687)

Research on heat-tensile flow stress and solid boss plate forging for 5052 aluminum alloy·····························LIN Qiquan,WANG Xiaowei,DONG Wenzheng,LI Yantao,WANG Zhigang(2695)

WADRC for anti-swing positioning of underactuated crane with one parameters tuning························································XIAO Yougang,LU Hao,YU Yi,HAN Kun(2703)

Load characteristics of transverse flange pick cutting seafloor massive sulfide under high confining pressure·····································································LI Yan,LU Peng,LI Yuqing(2712)

Experimental study on road durability using typical roads in China·················LONG Yan,JIANG Lingshan,XIONG Hailin,LIU Xueqiang,CHEN Zhiyong,YU Zhiming(2722)

Multi-objective optimization of lightweight and fatigue life for car door··············LONG Yan,JIANG Lingshan,LIU Xueqiang,XIONG Hailin,CHEN Zhiyong,ZHONG Huiqing(2732)

Wide and heavy plate crown control based on data mining····························CAO Jianguo,JIANG Jun,ZHAO Qiufang,HE Anrui,LI Cunfu,SUN Xudong(2743)

Development of parallel ankle rehabilitation robot and motion control strategy··················LI Jianfeng,ZHANG Zikang,ZHANG Leiyu,DONG Mingjie,ZUO Shiping,ZHANG Kai(2753)

Fault diagnosis of S700K switch machine based on EEMD multiscale sample entropy········WEI Wenjun,LIU Xinfa(2763)

Model on variable weight-target approaching for risk assessment of water and mud inrush in intrusive contact tunnels·····················LI Zhaoyang,WANG Yingchao,LIU Yang,JIAO Qinglei,WANG Mitian,ZHANG Ye(2773)

Upper bound limit method for stability analysis of fill slope considering difference between filling and foundation soil································DUAN Junyi,YANG Guolin,LIN Yuliang,QIU Mingming,SHEN Quan(2783)

Experimental study on lateral unloading mechanical properties of siltstone considering intermediate principal stress···························································MA Yupei,LI Jiangteng,LIU Shuangfei(2792)

Quantitative determination method of mesoscopic parameters of discrete elements based on spherical symmetric design······················································PENG Xia,RAO Qiuhua,LI Zhuo,ZHANG Jie(2801)

Study on mechanical properties and fracture of DT Ⅵ 2 fastener elastic bar ···································CHEN Xianmai,QU Zhengjia,CHEN Wentao,GUAN Jibo,LI Yuetao(2813)

Laboratory test on the effect of foundation pit dewatering··········································WANG Xuwei,YANG Tianliang,XU Yeshuang,YUAN Yao(2823)

Experimental study on the incipient motion of a single spherical particle in hydraulic collecting············································CHEN Yuxiang,XIONG Hong,CHENG Hui,CHEN Yang(2831)

Chloride ingression in reinforced concrete beams subjected to flexural loading under cyclic drying-wetting condition··········································CAI Jian,LI Mingkai,CHEN Qingjun,LAI Jun,WEI Muyang(2840)

Pipeline hydraulic gradient model and its application for coarse aggregate filling with high mass fraction of slurry··············································YANG Xiaobing,WU Fan,YANG Zhiqiang,GAO Qian(2851)

Study on discrete element particle flow of multi-layered ground-based expanded bottom uplift pile··························································LI Fei,YANG Junjie,SONG Qi,SUN Tao(2859)

Blasting vibration characteristics and safety standard of pipeline passed down by tunnel in short distance·······································GUAN Xiaoming,ZHANG Liang,WANG Limin,FU Hongxian,YU Daoming,CHEN Gang,DING Yi,JIANG Wanli(2870)

FTIR quantitative analysis of surface functional groups in the oxidation process of coal samples with different metamorphic levels··········TAN Bo,XU Bin,HU Mingming,YANG Xianbing,CHEN Kunliang,XU Cheng(2886)

Numerical simulation of influence law of steam injection parameters in SAGD preheating stage···············LI Peng,ZHANG Yanyu,SUN Xiaofei,LIU Yang,XIE Mengke,WANG Zhao,CHEN Huijuan(2896)

Optimization of locomotive secondary spring loads distribution based on improved particle swarm optimization algorithm···········································HAN Kun,YANG Guangwei,HUANG Zefan,BAO Tianzhe(2906)

Gantry crane scheduling with container rehandling operations in railway terminals·····GUO Peng,HE Xun,XU Suxia(2915)

No.12

Optimization of Knelson gravity separation of a quartz vein type gold ore using response surface methodology································CHEN Qiao,CHEN Guimin,TONG Linlin,LIN Yiren,YANG Hongying(2925)

Effects of synthesis conditions on formation process and property of zeolite prepared from electrolytic manganese residue······················LI Changxin,YU Yuan,ZHANG Qingwu,WANG Yang,ZHONG Hong,WANG Shuai(2932)

Adsorption characteristics and mechanism of azo dyes by powdered activated carbon·············ZHANG Tingting,YANG Yanling,LI Xing,JIANG Yifan,WANG Nan,JI Siyang,ZHOU Zhiwei(2938)

Effect of minor Mn addition on microstructure and fracture toughness of Al-Zn-Mg-Zr alloy sheet···CHEN Jingchao,CHAI Wenru,WANG Qing,YANG Zhenshen,LIU Shengdan,YE Lingying,TANG Jianguo(2948)

Effect of Co content on sintering and mechanical properties of FeCuCo pre-alloyed powders···································································LIU Zhihuan,ZHANG Shaohe(2958)

Effect of barrel temperature on filling quality of ultrasonic plasticized micro-parts··············JIANG Bingyan,ZHANG Yingping,QI Pengcheng,ZOU Yang,WEI Guomeng,WU Wangqing(2969)

Design method of electromagnetic directional valve under foundation vibration····························································· LUO Yongkang,LIU Ruichun,LIWei(2978)

Design and adsorption stability analysis of wall climbing robot based on wheeled magnetic adsorption for ultrasonic detection·····························································LI Jiechao,CAO Like,XIAO Xiaohui(2989)

Meshing performance analysis of involute cylinder worm and helical gear drive based on media rack··················································CHEN Yan,YIN Guofu,HENG Liang,WANG Ling(2998)

Effect of anti-skid control parameters on wheel wear of high speed vehicle··········································JIANG Yingjie,ZHANG Heji,TAO Gongquan,WEN Zefeng(3007)

Calculation method of tip vertical bearing capacity of rock-socketed pile on inclined rock surface····································SUN Yizhou,TONG Jianfu,QI Tian,SUN Honglei,CAI Yuanqiang(3015)

Damage identification based on transfer entropy and improved surrogate data method·······························YE Changpeng,LIU Guohua,HE Xianlong,XIE Zhongkai,WANG Zhenyu(3023)

Particle flow analysis of parallel double crack evolution under uniaxial compression···························· LI Yong,CAI Weibing,ZHU Weishen,DONG Zhenxing,ZHANG Qiangyong(3035)

Experimental study on damping characteristics of mudstone and sandstone under graded cyclic loading·················································WANG Ke,PAN Danguang,LU Wenyan,CHEN Fan(3046)

Optimal outrigger locations of high-rise buildings based on spectrum analysis···············ZHOU Ying,XING Lili(3055)

Flexural behavior of RC beams repaired with prestressed CTRC plates under sustaining loads··························································DU Yunxing,SHAO Xicheng,ZHOU Fen(3066)

Experimental research on effect of soil salinity in loess moisture migration under action of electric potential···································JIAO Dan,REN Ruihua,WANG Tiehang,SONG Yanlin,ZHANG Lei(3075)

Forecast of heritage deterioration based on freeze-thaw sensitivity of sandstone··················································LIAO Ruxue,CHENWenwu,WANG Nan,LIUWei(3084)

Performance of Q460 high strength steel and T-shape fully penetration butt weld joints···················································XING Jihui,CHEN Qian,WANG Tao,YANG Na(3097)

A method of diametrical core deformation analysis and its application on stress investigation in SK2Well·································YANG Yuehui,SUN Dongsheng,ZHENG Xiuhua,LINWeiren,LI Awei(3106)

Construction of three-dimensional mechanical model for creep and catastrophe of goaf group and accurate prediction of its stability····························REN Honggang,WANG Xuguang,TAN Zhuoying,XIA Zhiyuan(3114)

Axial compression performance and load bearing mechanism of prefabricated core steel tube reinforced concrete columns ·····························LIU Yang,WANG Chao,GUO Zixiong,WANG Pinzhi,XU Yipeng(3127)

Economic analysis of parallel hybrid gas heat pump based on optimal torque control strategy·····························································CHEN Tao,CAI Liang,YANG Yanan(3137)

Research on convergence mode and grid-connected optimization of offshore wind power based on improved particle swarm optimization algorithm ·················NIU Dongxiao,ZHAO Donglai,YANG Shangdong,LEI Xiao(3146)

Influence of false seam spacing on crack performance of bed slab············································WEI Youxin,YANG Bin,ZHAO Zhenhang,ZHAO Yanxi(3156)

Effect of longitudinal ventilation on temperature characteristics in metro tunnel under fire···········································YI Xin,FAN Jing,MALi,YANG Yuanbo,ZHANG Pengyu(3163)

The End of Vol.50(2019)